Installation manual
7
www.smartavi.com
Begin by powering on the HDR16X16. Once powered
on, press ESC on the remote control.
To assign an input to an output, simply press the 2
digit number of the input port, and then press ENTER,
immediately followed by the 2 digit number of the
output port, and then press ENTER.
For example: To assign input 1 to output 1, press 01,
ENTER , 01, ENTER.
Note: the front panel display will not indicate the
change until you have nished this process.
Remote Control
To view the menu, press MENU. There are 6 menu options available:
RS-232 Acknowledge - Sets the HDR16X16 to send a conrmation that an RS-232 command
has been received.
RS-232 Checksum - Sets the HDR16X16 to verify all RS-232 data for errors in transmission.
Send Update - Sets the HDR16X16 to send an RS-232 command back to the controller when
the conguration is changed via the front panel or remote control (optional).
Memory Save - Sets the HDR16X16 to save the conguration when powered o.
Display Input Status - This displays the status of the inputs. If no input is present, the display
will read NONE.
Restore Factory Settings - Sets the HDR16X16 to the default factory conguration.