Quick start guide

OVERVIEW
The DVX-2P can extend up to two DVI-D, USB 1.1, stereo
audio and RS-232 signals up to 275 feet using 4 CAT6
cables, while retaining perfectly clear, crisp image and
audio quality (image resolution up to 1900 x 1200
at 60 Hz).
FEATURES
• Top image quality at all resoluons
• Video resoluons up to 1900 x 1200 at 60Hz
(1280 x 1024 at 75Hz) up to 275 feet
• Internal DCC tables
• Distance: 275 feet with 4 CAT6 STP cables
• Compable with all operang systems
• Compable with all major KVM switches
• Rack mount opons (19)
• Supports up to 2 DVI-D sources
• Supports USB 1.1 keyboard and mouse
• Uses easy-to-install, inexpensive pair cable
• Data recovery for digital video
• Fully-compliant with USB 1.1 specicaons
• Supports 1.5 and 12Mbps data rates
• External power adaptors for transmier and receiver
units
• Fully-transparent (does not use any emulaon)
• Plug-and-play
1. Turn off a computer and a monitor.
2. Connect DVI male to male cable between the computer and the transmitter
3. Connect a monitor or a projecter to the DVI port on the receiver
4. Connect the transmitter and the receiver with 4 CAT6 STP cables
5. Connect the transmitter to the host using the A-B USB cable (included with the unit)
6. The A side of the connectorwould go to the computer host and the B side would be connected to the transmitter
7. Connect the receiver to the peripheral
8. Connect the CAT6 STP Cable
9. Connect an RS232 cable and/or audio cable to the source unit
10. Connect the audio using 3.5 mm cable at the transmitter
11. Connect the speaker/s at the receiver
12. Connect the last CAT6 STP cable
HARDWARE INSTALLATION
DVX-2P-TXS FRONT
DVX-2P-TXS BACK
DVX-2P-RXS FRONT
DVX-2P-RXS BACK
DVI IN
DVI OUT
USB IN
USB K/M OUT
USB 2.0 OUT
AUDIO IN
AUDIO OUT
FIBER
DVX-2P-RX
275 ft
DVX-2P-TX