USER MANUAL P70 HD WiFi Camera
1. Things to Know Before Getting Started -------------------- 1 1.1 Your WiFi Internet Connection ----------------------------------- 1 1.2 Network Name and Password ----------------------------------- 1 1.3 Operating System Requirements -------------------------------- 1 2. Get to Know Your P70 Camera ---------------------------- 2~3 2.1 P70 Overview --------------------------------------------------- 2 2.2 Light Indicators -------------------------------------------------- 3 3.
1. Things to Know Before Getting Started 1.1 Your WiFi Internet Connection - One critical factor affecting the performance of your P70 camera is the relative position of your home WiFi router and the P70. Set up your P70 in an open area (DO NOT place it on the floor); the closer the camera is to the router, the stronger the WiFi signal will result in better image quality & stability and overall satisfaction of the P70 or any IP Camera for that matter.
2. Get to Know Your P70 Camera 2.
2.2 Light Indicators The indicators on the camera, just below the lens, tells you the status of the P70.
3. Getting Started If you have also purchased a smanos alarm system which supports P70 in the APP, you can also setup your camera through the alarm’s app to keep an eye on what matters from anywhere. (eg: setting up your P70 through W120 alarm system) 3.1 Download the Apps Search for “P70 Camera” in the App Store/Google Play, then download and install the App.
Sign Up /In If you have not registered an account with smanos, please press “Sign Up” just below the “sign In” icon on the App, and follow the instructions to create your account. * If you do not receive an account verification code in your email after signing up, please check your spam/junk folder. Once your account has been verified, please select the “Sign In” icon and enter your email address and password to log in.
4. Setting Up Your P70 Camera ① Waiting for Your Camera to Boot Up Plug the power adapter into a wall socket, the blue indicator light will start blinking. ② Putting the P70 Camera into WiFi Connection Mode Press and hold the Reset Button on the side by using the supplied Reset Pin until the camera beeps once, and then release the button, the red indicator starts to blink.
③ Connecting Your P70 Camera to Your Smartphone Go to your smartphone’s WiFi settings, and select “smanos P70” to connect to the camera. Now, your smartphone is the control center of your P70. ④ Entering WiFi Details for Your P70 Camera Pick your 2.4GHz WiFi network from the drop down box listed on the app, and enter the WiFi network’s password. The P70 will connect to the selected WiFi network. This pairing process should take about a minute.
5. App Control 5.1 Live Video Page 1. Privacy Mode The P70 respects your privacy. No video will be recorded, the Red and Blue indicators will become solid. 2. Microphone (left) / Listen in (right) Press and hold the microphone button, talk, then release the button when you finish talking. Anyone in the vicinity of your P70 camera will hear you. If you want to listen in on the surrounding area of your P70, all you need to do is tap on the Listen In button. 3.
5.2 History Page Motion-triggered alerts can be reviewed from this History page. Tap on [ ] to pick a specific day and search for an alert. Note: Only the most recent 300 alerts will be shown. New alerts will overwrite the oldest ones.
5.3 Archive Page From Memory Card - 24/7 Continuous Recording ① Recording date ①②③④⑤⑥⑦⑧⑨⑩ ①②③④⑤⑥⑦⑧⑨⑩ ② Motion alert: motion was detected in this interval. ③ Pause button ④ Calendar: pick a specific day to view ⑤ Current time ⑥ No recording ⑦ Timeline: slide back and forth to select a time, and play the corresponding video.
5.4 My Albums - Video Clips and Snapshots You can find all your manually saved video clips and snapshots on this page. Any video or snapshot found here are stored on your phone and can be edited and shared as you wish. Deleting Video(s) or Snapshot(s) Tap on the edit icon [ ] and then press the shown [ video clip(s) or snapshot(s). ] to delete Sharing Video(s) or Snapshot(s) Tap on the edit icon [ ], and then press the shown [ video clip(s) or snapshot(s).
5.5 Settings Page General settings On this page, you can change the camera’s name, video quality and view orientation.
On/Off When the motion sensor is turned on, you will receive a push notification whenever motion is detected. Timing This is useful if you installed the P70 in a busy room or area. You can define a timeframe during which you wish to receive motion alerts.
Network Configuration Reconfiguration enables you to reconfigure Camera when a network issue has arisen. And switch between networks enables you to connect your Camera with another nearby WiFi network, without repeating the camera-phone pairing process. You can check your current network and the signal strength as well.
Time Settings This setting enables you to synchronize device time to your mobile, to make sure the time shown on the history and the time on push notifications are correct. When motion is detected, you will receive a push notification: (for example) Activity detected by [P70 camera name] at 08:20:00 GMT+2 Or Activity detected by [P70 camera name] at 07:20:00 GMT+1 DST during Daylight Saving Time.
Firmware Update This setting enables you to update your P70 camera to the latest firmware if necessary. WHEN AN UPDATE IS TAKING PLACE, FORCED TERMINATION WILL CAUSE SERIOUS DAMAGE TO YOUR P70 Camera. It is highly recommended that you keep your camera plugged in at all times, and DO NOT SWITCH THE DEVICE OFF BEFORE AN UPDATE IS COMPLETED. microSD™ Card Setting Checking your cards storage and wiping your microSD™ card can be done on this page.
6. Account Management 6.1 Editing your Account ⑤⑥⑦⑧⑨⑩ Tap on the portrait to change your portrait, user name and account password.
6.2 Sharing your Camera By choosing [My Shares] on the menu and tapping the [+] Add Button, you can share access to your device(s) with other registered accounts. Enter the email address and nickname of the account you want to share with, and then select the device(s). There are two types of sharing way with some key differences: the Administrator and the User who has been invited to control the devices.
User (Read Only) With User (Read Only), the shared user in this group will only be able to edit the name of the device(s) and receive alerts; re-sharing the device(s) to other users or changing the settings are not permitted. By week days Select the day(s) and each day's routine you want the device(s) to be accessible to the account you share with. By dates The family and/or friend(s) you share with would have access to your device(s) during the entire chosen time period.
7. Installation Important: You should place your camera in an area with a strong WiFi signal for optimal performance. 1. Separate the mounting template on the bottom of this camera from the bracket by pressing the snap as shown 2. Mount the template on the wall by using the supplied screws 3.
8. Specifications Image sensor Sony 1/2.9" CMOS sensor Shutter time 1/50s to 1/100,000s Lens 2.4mm F2.0 Angle of view 115° Video compression H.264 Bit rate Self-adaption Max. image resolution 1920 x 1080 Frame rate 20fps Storage Built-in microSD™ card slot, up to 32GB Wireless standards EEE802.11b/g/n Frequency range 2.4 GHz ~ 2.
