User manual
6
Getting Started
Operating Requirement
This video doorbell is only available to connect to a low voltage 8~24VAC
transformer or an existing traditional doorbell with a voltage of 8~24VAC. In
general, your traditional doorbell consists a ringer to be installed outdoor, and an
indoor chime with a transformer. When the ringer is pressed by visitor, a ringtone of
“ding dong” will remind the family there has a visitor.
If you don’t get a detailed information about your existing doorbell, please consult
your local agency or installer.
To ensure a good performance of the smart doorbell, please check the things
below:
(1) Please do not install the smart doorbell on the mental.
(2) Mount your smart doorbell at a proper height. It is highly recommended to
mount it at the height of 1.2~1.3m from the ground.
(3) One critical factor affecting the performance of this video doorbell is the WiFi
quality it connecting with, It is recommended to close your door and do a WiFi
speed test via speedtest app (for example) in the location where you want it to be
installed on to make sure that you have an upload speed of at least 2Mbps.
(4) The app of this video doorbell is available to run at iOS 9.0 or above with iPhone
5 or newer, Android 5.0 or newer.
Downloading the App
smanos home
Special Tips
Tap “Allow” to allow receiving notications from App. Forbidden to receive notications may
result in an application running failure, please allow it to send notications to your phone in
case of alarm.