SMA POWER+ SOLUTION – TS4
DISCLAIMER IMPORTANT LEGAL NOTICE This presentation does not constitute or form part of, and should not be construed as , an offer or invitation to subscribe for, underwrite or otherwise acquire, any securities of SMA Solar Technology AG (the “Company”) or any present or future subsidiary of the Company (together with the Company, the “SMA Group”) nor should it or any part of it form the basis of, or be relied upon in connection with, any contract to purchase or subscribe for any securities in the Company o
QUICK INSTALLATION GUIDE 1. System Overview In Office Preparation 2. Installing Cloud Connect Advanced (CCA) 5. Configuring the System Online 6. Commissioning 3. Installing Gateways (GTWY) 7. Registration Sunny Portal 4. Installing and Mapping TS4-R 8.
1. SYSTEM OVERVIEW: TS4-R Gateway (GTWY) DESIGN RULES: 1 CLOUD CONNECT ADVANCED (CCA): - Up to 7 GTWYs and 360 PV modules - All Smart Modules in the same string must be assigned to the same CC Next Gateway Internet 1 GATEWAY (GTWY): - Up to 120 PV modules - Modules must be within 10m-15m (33-50 ft.
1. SYSTEM OVERVIEW & PRODUCT DESCRIPTION TS4-M: MONITORING: The TS4-M provides continuous system-wide monitoring for fleets to make customer support and fleet workflow on track MORE INFORMATION: Monitoring TS4-S: SAFETY: The TS4-S provides the necessary safety and monitoring services required by municipalities Monitoring Safety TS4-O: OPTIMIZATION: In addition to safety, monitoring, and PV2.
ELECTRICAL INSTALLATION (STEP 2 – STEP 4) SMA Solar Technology AG
QUICK INSTALLATION GUIDE 1. System Overview In Office Preparation 2. Installing Cloud Connect Advanced (CCA) 5. Configuring the System Online 6. Commissioning 3. Installing Gateways (GTWY) 7. Registration Sunny Portal 4. Installing and Mapping TS4-R 8.
QUICK INSTALLATION GUIDE 1. System Overview In Office Preparation 2. Installing Cloud Connect Advanced (CCA) 5. Configuring the System Online 6. Commissioning 3. Installing Gateways (GTWY) 7. Registration Sunny Portal 4. Installing and Mapping TS4-R 8.
2. INSTALLING THE CLOUD CONNECT ADVANCED (CCA) 1 Attach CCA and power supply to DIN rail WHERE TO PLACE: Network Wired Ethernet and WLAN connections 2 Connect GTWY and power cables 2a • On a wall or beam • Next to the inverter • Out of direct sunlight 3 CONNECTIONS: 1. Internet connection, using one of the options: • Ethernet Port • Built in WLAN • WLAN connection is configured using the Tigo SMART app -+BA 2.
3. INSTALLING GATEWAYS (GTWY) 1 Place GTWY on back of PV module or racking system Installation: 50ft (15m) 1. Connect all GTWY cables before powering on Cloud Connect 2.
4.
4. INSTALLING & MAPPING: TS4-R 1 TEMPLATES: Remove 1 barcode sticker from the TS4 junction box or add-on Create your site map using Tigo’s string list template, to view and download, CLICK HERE Another option is to first map your site online (see next page). At the end, you’ll be able to download a physical map of your system to 2 Place the sticker on the map, string list or construction drawing, in the exact position you are going to place modules in the field or on the roof.
COMMISSIONING (STEP 5 – STEP 6) SMA Solar Technology AG
QUICK INSTALLATION GUIDE 1. System Overview In Office Preparation 2. Installing Cloud Connect Advanced (CCA) 5. Configuring the System Online 6. Commissioning 3. Installing Gateways (GTWY) 7. Registration Sunny Portal 4. Installing and Mapping TS4-R 8.
QUICK INSTALLATION GUIDE 1. System Overview In Office Preparation 2. Installing Cloud Connect Advanced (CCA) 5. Configuring the System Online 6. Commissioning 3. Installing Gateways (GTWY) 7. Registration Sunny Portal 4. Installing and Mapping TS4-R 8.
5. CONFIGURE SYSTEM ONLINE • Go to www.Tigoenergy.com • Create Installer account (if not already existing) CLICK HERE http://installations.tigoenergy.
5. CONFIGURE SYSTEM ONLINE • To configure a system online, log in to tigoenergy.
5.
6. COMMISSIONING To Commission the system use your smartphone, download the Tigo SMART app and follow its instructions. To commission the Tigo equipment there are 3 simple steps that need to be completed: 1. NETWORK TEST 2. GATEWAY TEST 3. DISCOVERY For systems with multiple Cloud Connect Advanced units, these tests need to be performed on each individual Cloud Connect Advance . Network and Gateway tests can run at the same time on different CCAs.
6.
6. COMMISSIONING ⇨ Smart Phone Connectivity During the setup process, you’ll see in the guide one of two messages Use your phone’s settings to toggle between WLAN networks: Requires active mobile data connection This message implies that the phone should be connected to the Internet and have mobile data enabled Example of a standard WLAN network data connection Or Requires direct WLAN connection to Cloud Connect This message implies that the phone should be connected to the Cloud Connect using WLAN.
6. COMMISSIONING ⇨ Enter Your Username and Password, and press [Login] Requires active mobile data connection If you do not have one, create a new account here: https://installations.tigoenergy.
6.
6.
6.
6.
6.
6.
6.
6.
6.
6. COMMISSIONING ⇨ Main Menu - Options Requires direct WLAN connection to Cloud Connect Advanced Available Commands: • Discovery – Scan for Gateways and Smart Modules • Gateway Test – Perform a test on the Gateway connection • Internet Setup – Configure and test an Ethernet or WLAN connection • Status – View system status and Discovery results App version 2.2.
6.
6.
6.
6.
6. COMMISSIONING ⇨ Once Discovery is Complete Requires direct WLAN connection to Cloud Connect Advanced You’ll see a confirmation that: • Discovery Status: Complete • All modules have been found (e.g. 18 of 18) • All Gateways have been found (e.g.
6. COMMISSIONING ⇨ Perform Gateway Test Requires direct WLAN connection to Cloud Connect Advanced • Press [Gateway Test] • Run Gateway Test • Wait while Cloud Connect scans for Gateways • View results of test App version 2.2.
6. COMMISSIONING ⇨ Perform Gateway Test Requires direct WLAN connection to Cloud Connect Advanced • Press [Gateway Test] • Run Gateway Test • Wait while Cloud Connect scans for Gateways • View results of test App version 2.2.
6.
6.
6.
6. COMMISSIONING ⇨ Network Test Will Run for Several Seconds Requires direct WLAN connection to Cloud Connect Advanced • The Network Test can diagnose problems with the Internet connection • Please note that when the Cloud Connect Advanced is mounted inside a metal enclosure, it may not receive a WLAN signal unless the antenna is mounted outside of the enclosure.
6.
6.
6.
6.
6.
REGISTRATION SUNNY PORTAL (STEP 7) SMA Solar Technology AG
QUICK INSTALLATION GUIDE 1. System Overview In Office Preparation 2. Installing Cloud Connect Advanced (CCA) 5. Configuring the System Online 6. Commissioning 3. Installing Gateways (GTWY) 7. Registration Sunny Portal 4. Installing and Mapping TS4-R 8.
QUICK INSTALLATION GUIDE 1. System Overview In Office Preparation 2. Installing Cloud Connect Advanced (CCA) 5. Configuring the System Online 6. Commissioning 3. Installing Gateways (GTWY) 7. Registration Sunny Portal 4. Installing and Mapping TS4-R 8.
7.
7.
7.
7.
7.
7.
7. SUNNY PORTAL – VISUALIZATION Panel Level Monitoring • On page „PV System Overview“, the PLM (Panel Level Monitoring) view is shown below the widgets • Layout is currently copied from Tigo Cloud. Configuration at SP is disabled. • Copying data from Tigo cloud is frequently copied.
7.
7.
SMA Solar Technology AG Sonnenallee 1 34266 Niestetal Germany Tel. +49 561 9522-0 Fax +49 561 9522-100 www.SMA.de Email: info@SMA.de SOCIAL MEDIA www.SMA.
