Operation Manual

Managing Data and Saving Data Locally SMA Technologie AG
Page 96 SDC-TEN080642 User Manual
Insert Mode
Depending on which template you have selected, you can specify the method of
insertion.
• fixed:The "fixed" mode is used when only certain channels are to be saved.
The columns are specified by the user. The selection of columns is set via the <Se-
lect columns> button, as described in the next step.
• autotinsert:In "autotinsert" mode, the channels which are set under "Channel
recording" are saved. The next section describes how to set the channels for
channel recording. See section 11. 5 „Setting up Sunny Boy Control Channel
Recording” (page 107). The columns are inserted automatically.
7. In the "Insert mode" field, select one of the two modes for writing measured values
to CSV files.
Selecting Columns
Depending on which template you have selected, you can now select the columns.
8. Click on <Select columns...>.
The "Select columns" window opens.
9. Click on <New> and select a column type.