Operation Manual

SMA Technologie AG Not es on thi s M an ua l
User Manual SDC-TEN080642 Page 9
1 Notes on this Manual
1. 1 Target Group
This manual is for installers as well as end users. It includes a description of the system
and instructions for the commissioning and operation of the device. Some of the
procedures may only be done by trained personnel, these procedures are marked with
a danger symbol.
1. 2 Validity
This documentation for the Sunny Data Control is valid for software version 3.93 and
higher. How to display the software version is described in chapter 2. 5 „Identification”
(page 15).
1. 3 Symbols Used
To ensure optimum use of this document, note the following explanation of the symbols
used.
This symbol indicates a notice which, if ignored, will make the procedure or oper-
ation more difficult.
This symbol indicates an example, which serves to help explain a working step.
This symbol identifies a warning, which indicates a fact or feature which,
if ignored, can cause serious damage to the device.
This symbol indicates a statement which, if ignored, could lead to serious
injury or death.