Operation Manual

SMA Technologie AG Displaying Data
User Manual SDC-TEN080642 Page 87
10.9. 2 Copying a Device Overview
1. Open the window in which the spot value queries are displayed by clicking on the
"Spotvalues" tab at the lower edge of the screen.
2. Click on "Spotvalues / Overview Management". The "Overview Management"
window opens (see figure below).
You can also call up the window by clicking anywhere on the screen with the right
mouse button and selecting "Overview Management".
All device overviews which have already been created are shown in the "Avail-
able Plants" list.
3. Click on the name of the device overview which you would like to copy.
4. Click on <Save as>. The "New Over-
view" window opens.
By default, the overview name shown is
always "Online00", or "Online01" etc.,
depending on whether an overview with
the name "Online00" etc. already ex-
ists.
5. In the field "Name of the overview",
type the desired name for the overview.
6. In the field "Description of the overview", you can type remarks about the over-
view. These remarks will also be saved, and provide you with a reference point
regarding the saved overview.
7. Click on <Ok> to save the setting.
Example