Operation Manual

SMA Technologie AG Displaying Data
User Manual SDC-TEN080642 Page 77
The following data are shown in the header of the single device view:
• Device Name
Here, the predefined inverter type, and the serial number are displayed. If you
change the device name, this name is shown here instead (to change the device
name, see section 13.2. 1 „Setting the Device Name and Device ID” (page 172)).
•Serial Number
Here, the inverter's serial number is displayed.
• Device Type
Here, the inverter's device type is displayed.
•Field Position
Here, the position of the device field in the device overview is indicated.
• Transmission Quality
Here, the inverter's transmission quality is indicated in percent, and with the words:
-Good
-Poor
Beneath the header is a list of the channel names and their values. You can specify
which channels are to be displayed in the single device view via the channel selection
for spot value queries. See section 10. 2 „Selecting Channels for Spot Value Queries”
(page 66).