Operation Manual

Initial Settings SMA Technologie AG
Page 46 SDC-TEN080642 User Manual
8. 3 Setting the Communication Connection
According to your selected type of connection to the PC, you must set the
corresponding connection in Sunny Data Control.
The communication connection setting always refers to the current plant, and can be set
differently for each plant.
In Sunny Data Control, you can set the connections listed below, which are described
in the sections which follow.
• COM1, 2, 3, etc.(here, your PC's COM ports are listed: COM1, COM2, etc.)See
section 8.3. 1 „COM1 – COM255” (page 46).
• "Modem"(here, the type name of the modem installed at your PC is displayed)See
section 8.3. 2 „Modem” (page 48).
• NetworkSee section 8.3. 3 „Network” (page 48).
• Sunny Beam (USB)See section 8.3. 4 „Sunny Beam (USB)” (page 51).
8.3. 1 COM1 – COM255
1. Select "Options / Settings", or click on the "Settings" icon. The "Set-
tings..." window opens.
2. Select "Communication".