Operation Manual

SMA Technologie AG Initial Settings
User Manual SDC-TEN080642 Page 45
8. 2 Loading a Plant
If you have created more than one plant, you must first load the plant which you wish
to edit or display. It is only ever possible to display and edit one plant at a time (current
plant) in the Sunny Data Control window.
1. Select "Options / Choose Plant", or click on the "Plant" icon (see figure
to the right).The "PV-Plant" window opens.
2. Select the plant which you wish to load by clicking on the name of the plant.
3. Click on <Load> to load the selected plant.