Operation Manual

Transferring Data to the Internet SMA Technologie AG
Page 144 SDC-TEN080642 User Manual
The "Settings" window is displayed once more.
Configuring the Server Port and Channel Scan
The server port setting specifies the TCP port at which the server awaits queries from the
SDC agent. By default, this is set to port 18503.
The channel scan setting is the time waited (in seconds) between sending two channel
updates.
9. If necessary, make the appropriate adjustments to the server port and channel
scan settings.
10. Enable the port on your router. To this end, refer to your router's user manual, or
contact your network administrator.
Only alter the server port and channel scan settings if you fully understand the con-
sequences of the changes. Incorrect settings can result in the SDC agent no longer
functioning.
If your Ethernet network is managed by a network administrator, contact this ad-
ministrator so that the appropriate port on the router can be enabled.
Example