Sunny Boy Installation Manual
Table Of Contents
- Installation Manual
- Legal Provisions
- Table of Contents
- 1 Information on this Document
- 2 Safety
- 3 Scope of Delivery
- 4 Product Overview
- 5 Mounting
- 6 Electrical Connection
- 7 Commissioning
- 8 Disconnecting the Inverter from Voltage Sources
- 9 Decommissioning the Inverter
- 10 Technical Data
- 11 Compliance Information
- 12 Contact
4 Product Overview
SMA Solar Technology AG
Installation ManualSBxx-1SP-US-41-IA-xx-1014
4 Product Overview
4.1 Product Description
SUNNY BO
Y
G
K
I
H
J
SUNNY BO
Y
B
E
C
A
D
F
Figure 2 : Design of the inverter
Position Designation
A Power Unit
B Enclosure lid of the Power Unit
C Enclosure lid for the Connection Unit
D Connection Unit
E Warning label with compliance information
F DC load-break switch
G Type label
The type label uniquely identifies the inverter. The type label must remain
permanently attached to the product. You will find the following informa-
tion on the type label:
• Inverter device type (Model)
• Serial number of the PowerUnit (Serial No. Power Unit or S/N
Power Unit)
• Date of manufacture
• Device-specific characteristics
H Fan (only with Sunny Boy 7.0 and 7.7)
ENGLISH