Installation Manual

7.5 Configuring the Inverter

After you have logged onto the user interface as Installer, the Configuring the Inverter page

opens.

Figure 14 : Layout of the Configuring the Inverter page

Position Designation Description

A Device information Provides the following information:

• Device name

• Inverter serial number

• Inverter firmware version

B User information Provides brief information on the listed configuration op-

tions

C Skip configuration Offers the option of skipping the inverter configuration

and go directly to the user interface (not recommended)

D Checkbox Allows you to choose not to have the displayed page dis-

played again when the user interface is called up again

E Configuration options Provides a selection of the various configuration options

Procedure:

On the Configuring the Inverter page, three configuration options are available to choose from.

Select one of the three options and proceed for the selected option as described below. SMA

recommends carrying out the configuration with the Installation Assistant. This way, you ensure that

all relevant parameters are set for optimal inverter operation.

• Adopt the configuration from a file

• Configuration with the Installation Assistant (recommended)

• Manual configuration

7 Commissioning

SMA Solar Technology America LLC

Installation Manual 53SB30-77-1SP-US-40-IA-xx-13

ENGLISH