Installation Manual
Table Of Contents
4 Mounting
SMA Solar Technology AG
Installation ManualEXTANT-US-40-IA-en-1414
• Considering the dead spot of the antenna, move the antenna bracket to the desired
position on the wall and hold it firmly.
• Mark positions of drill holes if necessary and drill two holes with 6mm (0.24in) diameter
each at the marked points and insert screw anchors.
• Attach the antenna bracket to the wall with the screws.
5. Attaching the antenna cable and the antenna to the antenna bracket:
• On the antenna cable, unscrew the counter nut
approx. 5mm (0.2in) from the plug.
• Lead the antenna cable plug from the antenna
bracket’s slot. In doing so, make sure that the
washer and the counter nut are on the outside
of the antenna bracket and that the antenna
cable is not kinked or twisted.
• Tighten the counter nut.