Specifications

EDMM-US-DS-en-21 SMA and ennexOS are registered trademarks of SMA Solar Technology AG. Printed on FSC-certified paper. Changes to products and services, including those resulting from country-specific requirements, and deviations from technical data are subject to change without notice. SMA assumes no liability for errors or omissions. For the latest information, go to www.SMA-Solar.com
SMA America, LLC
Toll Free +1 888 4 SMA USA
www.SMA-America.com
Technical data SMA DATA MANAGER M
Communications
Supporteddevices
Max. 50 devices: Inverters, I/O systems & meters, Ethernet, 100 Mbit/s
AND 2.5MVA total for PV inverters
Connections
Voltage supply 2-pin connection, MINI COMBICON
Network (LAN) 2 x RJ45, switched, 10BaseT/100BaseT
USB 1 x USB2.0, typeA
Voltage supply
Voltage supply External power supply unit (available as an accessory)
Input voltage 10 V to 30 V
Power consumption Typically 4 W
Ambient conditions in operation
Environment Restricted class 3K7 reg. IEC60721-3-3
Ambient temperature –4 °F to +140 °F
Permissible range for relative humidity (non-condensing) 5% to 95%
Maximum operating altitude above MSL 0m to 3,000m (≥70 kPa)
Degree of protection according to IEC60529 IP20
General data
Dimensions (W / H / D) 6.36 inch / 3.53 inch / 2.65 inch
Weight 0.5 lb
Mounting location Indoors
Mounting type Top-hat rail mounting / wall mounting
Status display LEDs for system and communication status
Features
Warranty 2 years
Certicates and approvals (more available upon request) www.SMA-Solar.com
Accessories (optional)
Top-hat rail power supply unit
Input: 100V to 240VAC / 45Hz to 65Hz
Output: 24VDC / 2.5A
I/O system by Moxa Europe GmbH ioLogik E1242 (4AI/4DI/4DIO), SMA order number: eIO-E1242
ioLogik E1260 (6RTD), SMA order number: eIO-E1260
I/O system by WAGO Kontakttechnik GmbH & Co. KG WAGO I/O SYSTEM 750 (8DI, 8DO, 4AI, 4AO, 2RTD),
SMA order number: eIO-750Bundle
Type designation EDMM-US-10