User's Manual
Table Of Contents
- 1 Information on this Manual
- 2 Safety
- 3 Product Description
- 4 Operation
- 5 "Home" Menu Item
- 6 "Charts" Menu Item
- 7 "Events" Menu Item
- 8 "Settings" Menu Item
- 8.1 Adjusting the Brightness
- 8.2 Disabling the Display
- 8.3 Setting the Scaling of the Daily Graph
- 8.4 Setting the Error Alert
- 8.5 Setting the Key Clicks
- 8.6 Identifying the Sunny View
- 8.7 Setting the Language
- 8.8 Country Settings
- 8.9 Setting the Date and Time
- 8.10 Searching for a New Plant
- 8.11 Adding a New Device
- 8.12 Replacing a Device
- 8.13 Changing the Device Name
- 8.14 Changing the Plant Password
- 8.15 What to Do in Case of a Lost Plant Password
- 8.16 Changing the Device Password
- 8.17 Displaying Connected Devices
- 8.18 Setting up a WLAN Connection
- 8.19 Checking and Setting Up a Bluetooth Connection
- 8.20 Configuring Online Data
- 8.21 Changing the Duration of the Slide Show
- 8.22 Selecting PV Visualization
- 8.23 Activating Demo Mode
- 9 Maintenance and Care
- 10 Decommissioning
- 11 Troubleshooting
- 12 Technical Data
- 13 Compliance Information
- 14 Online services, libraries, open source licences
- 15 Contact
8 "Settings" Menu Item SMA America, LLC
34 SunnyView-BA-eng-BUS121811 User Manual
8.16 Changing the Device Password
The device password can have a maximum of 12 characters. The password may contain the following
characters: A to Z, a to z, 0 to 9, ? , _ , ! and - .
1. Select > Settings > PV plant > Information.
2. Select the desired device.
3. Select [Device password].
4. Enter a new password in the "Set password" and "Confirm password" text boxes.
5. Select [Save].
8.17 Displaying Connected Devices
1. Select > Settings > PV plant > Information.
☑ The Sunny View displays a list of connected devices with the following symbols:
2. Select the desired device.
☑ Sunny View displays the type, serial number and software version of the device.
Symbol Status Significance
Neutral The status of the device is currently being
updated.
OK The device is operational and working
properly.
Warning The device is not working properly, but can
still feed power to the grid.
Error The device is not working properly and
does not feed power to the grid.
Communication Errors Unable to communicate with the device at
the moment. Possible causes include the
overnight shutdown setting for the inverter.
Lock A password other than the plant password
has been set for the device. Unable to
access the device.