User's Manual
Table Of Contents
- 1 Information on this Manual
- 2 Safety
- 3 Product Description
- 4 Operation
- 5 "Home" Menu Item
- 6 "Charts" Menu Item
- 7 "Events" Menu Item
- 8 "Settings" Menu Item
- 8.1 Adjusting the Brightness
- 8.2 Disabling the Display
- 8.3 Setting the Scaling of the Daily Graph
- 8.4 Setting the Error Alert
- 8.5 Setting the Key Clicks
- 8.6 Identifying the Sunny View
- 8.7 Setting the Language
- 8.8 Country Settings
- 8.9 Setting the Date and Time
- 8.10 Searching for a New Plant
- 8.11 Adding a New Device
- 8.12 Replacing a Device
- 8.13 Changing the Device Name
- 8.14 Changing the Plant Password
- 8.15 What to Do in Case of a Lost Plant Password
- 8.16 Changing the Device Password
- 8.17 Displaying Connected Devices
- 8.18 Setting up a WLAN Connection
- 8.19 Checking and Setting Up a Bluetooth Connection
- 8.20 Configuring Online Data
- 8.21 Changing the Duration of the Slide Show
- 8.22 Selecting PV Visualization
- 8.23 Activating Demo Mode
- 9 Maintenance and Care
- 10 Decommissioning
- 11 Troubleshooting
- 12 Technical Data
- 13 Compliance Information
- 14 Online services, libraries, open source licences
- 15 Contact
5 "Home" Menu Item SMA America, LLC
22 SunnyView-BA-eng-BUS121811 User Manual
5.3 Plant Data
Plant data is divided into multiple slides. You can scroll through the slides by dragging your finger
from the left or right. The slides change automatically after a preset time. You can change the preset
time (see Section 8.21 "Changing the Duration of the Slide Show", page 36).
You can enable or disable the slides under settings (see Section 8.22 "Selecting PV
Visualization", page 36).
Slides
Description Description
Overview This slide provides an overview of the entire yield of your plant.
Power and energy This slide shows the current power, the daily power and the total
energy yield of the plant.
Power chart This diagram shows the daily power of the plant.
Yield estimate This slide shows the total and daily revenue for grid feed-in.
CO
2
avoidance This slide shows the daily and overall amount of CO
2
saved.
Saved kilometers/miles This slide shows the daily and overall number of kilometers/miles
saved.
Errors and warnings This slide appears automatically when an error or warning occurs.
An alarm sounds only when an error event occurs and the inverter
stops feeding power to the grid (see Section 8.4 "Setting the Error
Alert", page 28).
Press the [Close] button to acknowledge the event. Press the
[Details] button to access the event list (see Section 7). If not
acknowledged, the alarm will sound again after a preset interval.
Weather If meteorological data is available from the Internet, this slide
shows the following meteorological data for the preset location:
• Current weather
• Forecast for the next three days