User's Manual
Table Of Contents
- Revision History
- Safety and Hazard Symbols
- Warnings
- Other Symbols
- Warranty
- Introduction
- Unpacking
- Installation and Setup
- Commissioning
- Operation
- Power Supply
- The Home Screen
- Home Screen Display Options
- Setup Options
- Setup Menu
- Using the USB Port
- Sunny Data Control
- Figure 1-29 Guide to SDC Overview Screen
- Figure 1-30 Sunny Data Control Settings Window
- Figure 1-31 Current Plant Tree Window with Measuring Channels
- Figure 1-32 Fading in Devices
- Figure 1-33 Arrangement of the Device Windows
- Figure 1-34 Example of One Window per Device
- Figure 1-35 Channel Selection Window
- Troubleshooting
- Specifications
Sunny Beam Manual Operation
17
Monthly Data
The total power output for each of the inverters is stored for viewing in the Daily Energy Yield
screen. By rotating the knob, the total for each inverter as well as the total for the plant can be
viewed.
Figure 1-12 Daily Energy Yield
Home Screen Display Options
In addition to the factory set of display options, there are several additional types of
information that can be displayed. The following examples show the different parameters that
are available.
NOTE: Instructions on how to activate each of these options is in the following
section under Data View.
L8I .P
%"*-:&/&3(::*&-%
.BZ