User's Manual
Table Of Contents
- Revision History
- Safety and Hazard Symbols
- Warnings
- Other Symbols
- Warranty
- Introduction
- Unpacking
- Installation and Setup
- Commissioning
- Operation
- Power Supply
- The Home Screen
- Home Screen Display Options
- Setup Options
- Setup Menu
- Using the USB Port
- Sunny Data Control
- Figure 1-29 Guide to SDC Overview Screen
- Figure 1-30 Sunny Data Control Settings Window
- Figure 1-31 Current Plant Tree Window with Measuring Channels
- Figure 1-32 Fading in Devices
- Figure 1-33 Arrangement of the Device Windows
- Figure 1-34 Example of One Window per Device
- Figure 1-35 Channel Selection Window
- Troubleshooting
- Specifications
Commissioning Sunny Beam Manual
12
Sunny Boy Detection
Once the date and time are set the Sunny Beam will automatically begin to search for active
inverters. While the Sunny Beam is searching, the radio frequency, or “group” number is
displayed along with the number of inverters found.
NOTE: The Sunny Beam should be kept a minimum of 10 feet away from the
Sunny Boy during the detection process to avoid overloading the receivers.
Figure 1-9 Sunny Boy Detection Process
4VOOZ# FBN
4VOOZ#PZ%&5&$5*0/
(3061
%&5&$5&%4VOOZ#PZT