User's Manual

SMA Technologie AG Installation
User Manual SBRepU-11:NU0207 Page 21
5 Installation
The repeater can be used as a tabletop or wall-mounted device. If you choose to mount
the device on a wall, you can either mount it directly on the wall or on DIN rails.
5.1 Tabletop Device
If you use the repeater as a tabletop device, follow the points below:
• Do not cover the repeater. This can cause the device to overheat.
• Lay the USB power supply cable in such a manner that its weight does not cause
it to disconnect.
• Lay the cable properly so that there is no risk of persons tripping over it.
Only install the repeater once you have determined the appropriate installation
location as described in section 4 "Determining the Installation Location" (Page
13).