User's Manual
Table Of Contents
- Revision History
- Safety and Hazard Symbols
- Warnings
- Other Symbols
- Warranty
- Introduction
- Unpacking
- Installation and Setup
- Commissioning
- Operation
- Power Supply
- The Home Screen
- Home Screen Display Options
- Setup Options
- Setup Menu
- Using the USB Port
- Sunny Data Control
- Figure 1-29 Guide to SDC Overview Screen
- Figure 1-30 Sunny Data Control Settings Window
- Figure 1-31 Current Plant Tree Window with Measuring Channels
- Figure 1-32 Fading in Devices
- Figure 1-33 Arrangement of the Device Windows
- Figure 1-34 Example of One Window per Device
- Figure 1-35 Channel Selection Window
- Troubleshooting
- Specifications
Operation Sunny Beam Manual
40
Once the windows are setup, the individual channels can be customized by right-clicking in
the window of the device to be modified and selecting Channel Selection. In the Channel
selection window, individual parameters can be added or removed providing a customized
view for each device if desired. See the following figure.
Figure 1-35 Channel Selection Window
For a complete listing of all of Sunny Data Control’s functions, click on the question mark near
the top left of the SDC window and select Manual.