User's Manual
Table Of Contents
- Revision History
- Safety and Hazard Symbols
- Warnings
- Other Symbols
- Warranty
- Introduction
- Unpacking
- Installation and Setup
- Commissioning
- Operation
- Power Supply
- The Home Screen
- Home Screen Display Options
- Setup Options
- Setup Menu
- Using the USB Port
- Sunny Data Control
- Figure 1-29 Guide to SDC Overview Screen
- Figure 1-30 Sunny Data Control Settings Window
- Figure 1-31 Current Plant Tree Window with Measuring Channels
- Figure 1-32 Fading in Devices
- Figure 1-33 Arrangement of the Device Windows
- Figure 1-34 Example of One Window per Device
- Figure 1-35 Channel Selection Window
- Troubleshooting
- Specifications
Operation Sunny Beam Manual
32
Coefficients of Balance
This menu allows the price per kilowatt hour and the type of currency to be selected. This also
determines the formula for the Earnings display. The kilograms of CO2 saved per kilowatt hour
can also be set. The factory default for kg CO2 / kWh is a factor of 1.70.
Figure 1-27 Coefficients of Balance
Reset Sunny Beam
Resetting the Sunny Beam will restore everything in the Sunny Beam to zero except for the time
and date. All other data will be erased. Select RESET Sunny Beam and there will be a prompt
for confirmation before the Sunny Beam resets itself.
4VOOZ# FBN
$ 0 &''*$*&/540'#"-"/$&
&"3/*/(L8I
$633&/$:
LH$0L8I
&9*5