User's Manual
Table Of Contents
- Revision History
- Safety and Hazard Symbols
- Warnings
- Other Symbols
- Warranty
- Introduction
- Unpacking
- Installation and Setup
- Commissioning
- Operation
- Power Supply
- The Home Screen
- Home Screen Display Options
- Setup Options
- Setup Menu
- Using the USB Port
- Sunny Data Control
- Figure 1-29 Guide to SDC Overview Screen
- Figure 1-30 Sunny Data Control Settings Window
- Figure 1-31 Current Plant Tree Window with Measuring Channels
- Figure 1-32 Fading in Devices
- Figure 1-33 Arrangement of the Device Windows
- Figure 1-34 Example of One Window per Device
- Figure 1-35 Channel Selection Window
- Troubleshooting
- Specifications
Operation Sunny Beam Manual
26
View Options
The View Options menu allows the interval at which the data is updated to be adjusted.
Data Change Freq.: Sets the interval at which the data on the screen is updated. This can be
set from 5 to 30 seconds.
Data Request Freq.: Sets the interval at which data is requested from the Sunny Boy inverter.
This can be set from 10 seconds to 60 minutes.
Display Off Delay: Sets the amount of time the Sunny Beam will wait during inactivity before
shutting off the display to conserve power.
History: Selects wether the historical data is displayed for the last calendar month (1 M) or last
31 days (31D).
NOTE: These settings greatly effect the overall energy consumption of the Sunny
Beam. For longer battery life, set longer Data Request times and shorter Data
Change and Display Off times.
Figure 1-22 View Options Menu
4VOOZ# FBN
7*&8 015*0/4
%"5"$)"/(&'3&2
%"5"3&26&45'3&2
%*41-":0''%&-":
)*4503:
&9*5
T
T
T
.