User's Manual
Table Of Contents
- Revision History
- Safety and Hazard Symbols
- Warnings
- Other Symbols
- Warranty
- Introduction
- Unpacking
- Installation and Setup
- Commissioning
- Operation
- Power Supply
- The Home Screen
- Home Screen Display Options
- Setup Options
- Setup Menu
- Using the USB Port
- Sunny Data Control
- Figure 1-29 Guide to SDC Overview Screen
- Figure 1-30 Sunny Data Control Settings Window
- Figure 1-31 Current Plant Tree Window with Measuring Channels
- Figure 1-32 Fading in Devices
- Figure 1-33 Arrangement of the Device Windows
- Figure 1-34 Example of One Window per Device
- Figure 1-35 Channel Selection Window
- Troubleshooting
- Specifications
Sunny Beam Manual Commissioning
13
Excluding Inverters
Once the Sunny Beam has finished searching for inverters, it will display the inverters found
and show their type and serial numbers. This screen provides an opportunity to exclude certain
inverters. For example, if the Sunny Beam can detect inverters that are not part of the plant or
if it detects inverters that will not be monitored at this time, the undesired inverters would be
excluded during this step.
To exclude an inverter, rotate the knob so that the inverter to be excluded is highlighted, press
the knob to select the inverter. When excluded, the Sunny Beam will strike-through the
inverter’s information. See the illustration below. If no inverters are to be excluded, select
Proceed to Registration.
NOTE: The Sunny Beam allows manual detection of inverters at anytime so
excluded inverters can be added when desired.
Proceed to Registration: Once any excluded inverters are selected, continue to the registration
process to complete the setup.
Find More Devices: Instructs the Sunny Beam to continue to search for more inverters.
Cancel: Select cancel to exit this process.
Once this process is complete, the Sunny Beam will display the home screen and begin normal
operation.
Figure 1-10 Excluding Inverters During Startup
4VOOZ# FBN
&9$-6%&4 VOOZ#PZT
83)94/
83.44/
83)94/
130$&&%503&(*453"5*0/
'*/%.03&%&7*$&4
$"/$&-