User Manual

PC-KP20 SMA Solar Technology AG
Technical Description KP20USRG-31:EE2015 3
Content
1 Information on this Document ..................................................................................................................... 3
1.1 Validity.................................................................................................................................................... 3
1.2 Purpose ................................................................................................................................................... 3
2 PC-KP20 Board ............................................................................................................................................ 3
3 FCC and IC Compliance Information ......................................................................................................... 5
1 Information on this Document
1.1 Validity
This document is valid for the communication module PC-KP20.BG1 including the corresponding housing.
You will find the type designation on the type label on top of the device.
1.2 Purpose
The purpose of this document is to summarize all for FCC and IC certification relevant technical information
of the PC-KP20 as well as FCC and IC Compliance Information intended for the end user of the host prod-
uct.
2 PC-KP20 Board
The intended use of the PC-KP20 is the integration as the central communication unit into solar inverters or
similar devices (e.g. battery inverter), designed and manufactured by SMA Solar Technology AG. The use of
this module by other manufacturers beside the SMA Solar Technology AG and affiliated companies (herein-
after referred as SMA Solar Technology AG) is not permitted. The PC-KP20 will be attached to the power
unit where it will be supplied and communicates with the processor of the power unit.
For the wireless communication the PC-KP20 provides an IEEE802.11b/g/n for the 2.4 GHz band. This
interface provides:
1x internal antenna for receiving and transmitting