User's Manual

1.3 Target Group
The tasks described in this document must only be performed by qualified persons. Qualified
persons must have the following skills:
• Training in the installation and configuration of IT systems
• Training in how to deal with the dangers and risks associated with installing and using
electrical devices and installations
• Training in the installation and commissioning of electrical devices and installations
• Knowledge of the applicable standards and directives
• Knowledge of and compliance with this document and all safety information
2 Safety
2.1 Intended Use
The SMA Industrial Manager is a data logger that acts as a PV system gateway and energy
manager. PV system components and PV systems are integrated together with energy generators
and loads into the SMA infrastructure. The SMA Industrial Manager can integrate PV system
components via the Ethernet interface. Furthermore, devices can be integrated per Modbus into the
PV systems via a galvanically separated RS485 interface. In the process, the SMA Industrial
Manager is supporting communication with up to 25 devices such as PV inverter, battery inverter
and
energy meter. The number of supported devices can be extended optionally to 75.
Use this product only in accordance with the information provided in the enclosed documentation
and with the locally applicable standards and directives. Any other application may cause
personal injury or property damage.
Alterations to the product, e.g. changes or modifications, are only permitted with the express written
permission of SMA. Unauthorized alterations will void guarantee and warranty claims and in most
cases terminate the operating license. SMA shall not be held liable for any damage caused by
such changes.
Any use of the product other than that described in the Intended Use section does not qualify as the
intended use.
The enclosed documentation is an integral part of this product. Keep the documentation in a
convenient place for future reference and observe all instructions contained therein.
The type label must remain permanently attached to the product.
2.2 Safety Information
This section contains safety information that must be observed at all times when working on or with
the product.
To prevent personal injury and property damage and to ensure long-term operation of the product,
read this section carefully and observe all safety information at all times.
2 Safety
SMA Solar Technology AG
Quick Reference GuideIND-US-10-IS-xx-106
ENGLISH