User's Manual
Table Of Contents
- 1 Information on this Manual
- 2 Safety
- 3 Description of the Bluetooth Piggy-Back
- 4 Scope of Delivery
- 5 Identifying the Bluetooth Piggy-Back
- 6 Preparing Bluetooth Communication
- 7 Mounting
- 8 Establishing Bluetooth Communication
- 9 Updating the Firmware
- 10 Decommissioning
- 11 Troubleshooting
- 12 Technical Data
- 13 FCC Compliance Information
- 14 IC Compliance Information
- 15 Contact
Decommissioning SMA America, LLC
24 BTPB_Ant-eng-IUS111410 Installation Guide
4. Unscrew the antenna cable plug from the antenna
connection of the Bluetooth Piggy-Back.
5. Pull the antenna cable out of the inverter through the
enclosure opening.
6. Cut the cable tie and remove it from inverter.
7. Remove the Bluetooth Piggy-Back from the interface
socket.
1234
UNGROUNDED GROUNDED
L1 L2 N
GROUNDING
ELECTRODE
CONDUCTOR
COMBINED
5 72 3
A
C
B