User's Manual
Table Of Contents
- 1 Information on this Manual
- 2 Safety
- 3 Description of the Bluetooth Piggy-Back
- 4 Scope of Delivery
- 5 Identifying the Bluetooth Piggy-Back
- 6 Preparing Bluetooth Communication
- 7 Mounting
- 8 Establishing Bluetooth Communication
- 9 Updating the Firmware
- 10 Decommissioning
- 11 Troubleshooting
- 12 Technical Data
- 13 FCC Compliance Information
- 14 IC Compliance Information
- 15 Contact
SMA America, LLC Decommissioning
Installation Guide BTPB_Ant-eng-IUS111410 23
10 Decommissioning
10.1 Removing the Bluetooth Piggy-Back
1. Unscrew the antenna from the antenna cable.
2. Disconnect and open the inverter (see inverter installation guide).
3. Unscrew the counter nut from the thread of the
antenna cable.
DANGER
Risk of lethal electric shock when opening the inverter.
Death or serious injuries.
• Disconnect the inverter on the AC and DC side (see inverter installation guide).
NOTICE
Electrostatic discharge can damage the inverter.
• Ground yourself before touching components by touching the protective conductor
(PE) or a non-coated part of the inverter enclosure.
1234
UNGROUNDED GROUNDED
L1 L2 N
GROUNDING
ELECTRODE
CONDUCTOR
COMBINED
5 72 3
A
C
B