User's Manual
Table Of Contents
- 1 Information on this Manual
- 2 Safety
- 3 Description of the Bluetooth Piggy-Back
- 4 Scope of Delivery
- 5 Identifying the Bluetooth Piggy-Back
- 6 Preparing Bluetooth Communication
- 7 Mounting
- 8 Establishing Bluetooth Communication
- 9 Updating the Firmware
- 10 Decommissioning
- 11 Troubleshooting
- 12 Technical Data
- 13 FCC Compliance Information
- 14 IC Compliance Information
- 15 Contact
Safety SMA America, LLC
10 BTPB_Ant-eng-IUS111410 Installation Guide
2.3 Safety Instructions
DANGER
There is a risk of lethal electric shock when touching conductive parts of the inverter.
• Prior to performing any work on the inverter, disconnect the inverter on the AC and
DC sides (see inverter installation guide).
• Only skilled persons may work on the inverter.
CAUTION
Possible damage to health as a result of the effects of radiation.
• Do not stay closer than 8 in. (20cm) to the inverter with Bluetooth Piggy-Back for any
length of time.
NOTICE
By touching electronic components you can cause damage to or destroy the inverter
through electrostatic discharge (ESD).
• Ground yourself before touching a component by touching the protective conductor
(PE) or a non-coated part of the inverter enclosure.
• Avoid coming into contact with components and plug contacts.