User Manual

7
Manuale Utente PS112A / PS115A
4
Connections and handling:
• Before connecting the device to other devices, turn off the power for all devices. Before turning
the power on or off for all devices, set all volume levels to minimum. • Do not use the device or
headphones for a long period of time at a high or uncomfortable volume level, since this can cause
permanent hearing loss. If you experience any hearing loss or ringing in the ears, consult a
physician.
• Do not rest your weight on the device or place heavy objects on it, and avoid use excessive force
on the buttons, switches or connectors
Do not open:
• Do not open the device or attempt to disassemble the internal parts or modify them in any way.
The device contains no user-servicable parts. If it should appear to be malfunctioning, discontinue
use immediately and have it inspected by qualified service personnel.
Water warning:
• Do not expose the device to rain, use it near water or in damp or wet conditions on it containing
liquids which might spill into any openings. Never insert or remove an electric plug with wet hands.
If you notice any abnormality:
• If the power cord or plug becomes frayed or damaged, or if there is a sudden loss of sound during
use of the device, or if any unusual smells or smoke should appear to be caused by it, immediately
turn off the power switch, disconnect the electric plug from the outlet, and have the device
inspected by qualified service personnel.
E
N
G
L
I
S
H
Installation
Place the speaker on a solid flat surface (table, ground, etc.) or use a solid speaker stand with
35mm flange. Make sure that all fixings are tight.
Power connection and wiring
Please connect the power cable to 110/220(230)V 50/60Hz power voltage. Make sure to set the
power input selector to the available net voltage. Connect all input/output signals with XLR and/or
6.35mm jack cables. Do not connect multiple inputs possibilities (ex. RCA/ Jack 6,35mm) with
more than one cable.
After you finished all audio connections set master volume to “0”. Switch on audio source and
speaker power. Set Mic/Line level to 12 o'clock position and increase master volume to comfortable
level.
Getting started
Ø = 35 mm
1 Ingresso Microfonico COMBO
Consente di collegare un microfono tramite XLR o Jack 6.35 mm
1a Controllo volume Microfono
Usa questo controllo per regolare il livello del microfono
2 Ingresso Linea COMBO
Consente di collegare un'apparecchio esterno (CD,radio / DVD, ecc)
tramite XLR, Jack 6.35mm o connettori RCA
2a Controllo volume Ingresso Linea
Usa questo controllo per regolare il livello della sorgente Linea
3 Uscita Segnale
Usa un connettore Jack 6,35 o XLR per collegare un diffusore amplificato supplementare
4 Volume
Consente di regolare il Volume generale
5 Treble
Consente di regolare i toni acuti
6 Bass
Consente di regolare i toni bassi
7 POWER LED
8 CLIP LED
9 AC Power
Usa questo connettore per collegare il cavo di alimentazione
10 ON/OFF Power Switch
Interruttore di accensione/spegnimento
I
T
A
L
I
A
N
O