User Manual

16
- You may adjust the fade time by the FADE TIME fader.
- Press a CHASE button, the chase will be sound controlled. You may press more then one chase
to run them one by one.
- You may adjust the duration time via FADE TIME fader.
AUTO MODE
- To select the Auto Mode, press AUTO/DEL button until Auto led is lit
- Switch off all buttons SCANNERS 1÷12.
- If no CHASE buttons are pressed, it will run bank automatically. Select the desired bank via
BANK UP/DOWN buttons.
- Press a CHASE button, it will run the case automatically. You may press more then one chase to
run them one by one.
- You may adjust the interval time between steps via SPEED fader, and adjust the duration time
via FADE TIME fader.
In auto mode, you can control each projector in manual mode. Press the respective SCANNERS button
and move the sliders.
MIDI OPERATION
- Press and hold the MIDI/REC button for three seconds.
- Use the BANK UP/DOWN to select the DMX channel 01-16 to assign to MIDI channel.
- Press and hold down the MIDI/REC for three seconds to store your setting and to deactivate
MIDI setting.
- If you wish to give up your setting, tap any other button except BANK UP/DOWN to ext MIDI
mode.
This unit receives Note On signals wich enables to run 15 banks (01-15) of scenes, and 6 chases of
scenes. In addition, black-out function can be activated by MIDI signal.
Bank: Note number: Function:
Chase
Bank 01 00 to 07 turn On or Off scenes 1-8 of bank 1
Bank 02 08 to 15 turn On or Off scenes 1-8 of bank 2
Bank 03 16 to 23 turn On or Off scenes 1-8 of bank 3
……… ……………. ……………….
Bank 13 96 to 103 turn On or Off scenes 1-8 of bank 13
Bank 14 104 to 111 turn On or Off scenes 1-8 of bank 14
Bank 15 112 to 119 turn On or Off scenes 1-8 of bank 15
Chase 1 120 turn On or Off chase 1
Chase 2 121 turn On or Off chase 2
Chase 3 122 turn On or Off chase 3
Chase 4 123 turn On or Off chase 4
Chase 5 124 turn On or Off chase 5
Chase 6 125 turn On or Off chase 6
126 black-out
CLEANING AND MAINTENANCE
DANGER TO LIFE: disconnect from mains before starting maintenance operation.
We recommend frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact you dealer.
TECHNICAL SPECIFICATIONS
Power supply 230V / 50Hz adaptor in the package
(117V / 60Hz USA)
Power consumption 4 W
Number of control channels 192
Sound control Via built-in microphone
DMX output 3-pin XLR connector with polarity selector
Free chase 6 x 240 scenes
Dimensions 482 x 132 x 80 mm (3U rack)
Net weight 2,5 kg
Please note: information is subject to change without prior notice