User Manual

11
CAUTION !
- Keep this device away from rain and moisture!
- Unplug mains lead before opening the housing!
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL
START UP
Every person involved with the installation, operation and maintenance of this device has to:
- Be qualified
- Follow the instructions of this manual
Before your initial start-up, please make sure there is no damage caused during shipment. Should there be
any, do not use the device and consult your supplier.
SAFETY INSTRUCTIONS
This device has left our premises in absolutely perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this manual.
IMPORTANT: damages caused by the disregard of this user manual are not subject to warranty.
Keep away from heaters and other heating sources.
Keep away children and amateurs from the device. Never leave the device running unattended.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), don not switch
it on immediately. The arising condensation water might damage your device. Leave the device switched
off until it has reached room temperature.
This device falls under PROTECTION CLASS III. It always has to be operated with an appropriate
transformer. Check the device, the power cord and transformer from time to time. Make sure that the
correct type as that stated on the rear panel.
Always disconnect from the mains, when the device is not in use, or before cleaning it.
Maintenance and service operations are only to be carried out by authorized dealers.
Please note that damages caused by manual modifications on the device or unauthorized operation by
unqualified persons, are not subject to warranty.
OPERATING DETERMINATIONS
This device is a DMX controller for controlling DMX effects or spots in discotheques, on stages etc. It is
allowed to be operated with a direct voltage of DC 9-12V, minimum 300mA and was designed for indoor
use only.
Do not shake the device. Avoid brute force when installing or operating.
When choosing the installation point, please make sure that the device is not exposed to extreme heat,
moisture or dust. There should not be any cables lying around. Your endanger your own and the safety of
others.
Operate this device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation.
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons.
If this device will be operated in any way different to the one described in this manual, it may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like
short circuit, burns, electric shock, etc.
MAIN FEATURES
DMX controller
- 192 control channels for 12 projector each up to 16 channels
- Fine pan/tilt movements possible via FINE button
- 6 chase with up to 240 scenes can be programmed
- 30 banks each up to 8 scenes (240 scenes)
- Copy function for the scenes, programme and chase
- Black-out function