Manual

SMP RO AUDIO MPatch 5.1
Mpatch 5.1 Audio output Connections
Stereo Operation
The MPatch 5.1 features three sets of outputs.
For monitoring the L/R stereo signal, you would normally use the Stereo Balanced
XLR outputs. If your speakers are unbalanced, you can use this output with an
adaptor that connects to Pin 1 (hot) and Pin 3 of the XLR connector.
The L/R stereo signal also appears at outputs 7 and 8,
respectively, of the D-Sub Slave Output.
5.1 Surround output
These balanced 1/4” TRS outputs
carry the individual 5.1 audio streams.
Power Input
OFF ON
POWER
L
R
LS
RS
LFE
C
L
R
Balan ce d
Left Right
LRL SR SCLFE
INPUT BINP UT D
Stereo Sp eaker Outs
Surroun d Speaker Ou tputs
INPUT A+ C
SLAVE OUTPUT
Balance d input and Li nk to output
(90-240 V ac)
Power Input
OFF ON
POWER
L
R
LS
RS
LFE
C
L
R
Balan ce d
Left Right
LRL SR SCLFE
INPUT BINP UT D
Stereo Sp eaker Outs
Surroun d Speaker Ou tputs
INPUT A+C
SLAVE OUTPUT
Balance d input and Li nk to output
(90-240 V ac)
Tip
Ring
Sleeve
SMP RO AUDIO MPatch 5.1
Output selector switches
Mas t er
MPATCH 5.1
Pass ive vol um e con tr ol
mo ni tor s wi tc her
-20db PAD
SL/SR-MONOL/R-MONO
C+DA/B + C/DA+B
ALL MUTE
LFESRSLR CL
Stereo Monitors
5.1 Surround Monitors
Mas t er
MPATCH 5.1
Pass ive vol um e con tr ol
mo ni tor s wi tc her
-20db PAD
SL/SR-MONOL/R-MONO
C+DA/B + C/DA+B
ALL MUTE
LFESRSLR CL
Stereo Monitors
5.1 Surround Monitors
Individual mute switches
Mute all outputs
Surround > Mono
Surround input selector
Stereo input selector
-20dB Pad
Surround or
stereo input selector
Stereo > Mono
D-Sub surround outputs 1-6
mirror D-Sub inputs 1-6 (pg. 6).