User manual

Explanation of the safety warnings:
DANGER: immediate dangerous situation leading to death or severe
injuries when not avoided.
WARNING: possible dangerous situation leading to death or severe
injuries when not avoided.
CAUTION: possible dangerous situation leading to injuries or material
damage when not avoided.
1. NOTES ON SAFETY
 Installation, mounting or works on the electrical connection may
only be carried out by an approved electrician.
 Do not cover the product - provide free air circulation! Remove leaves
and dirt regularly.
 Do not hang or fasten anything on the product, especially no decoration.
 Keep children away from the product.
 The fixture may only be operated with a complete and intact protection
glass.
 Operate the product only when it functions properly:
DANGER
In case of a malfunction you may NOT touch the product or operate it
further. Disconnect the product from the power supply by an external switch
or by the fuse.
 If touched or further operated there is danger from electric shock,
burning, or fire.
A malfunction exists when:
 visible damages appear.
 the product does not work properly (e.g. flickering).
 smoke, steam or crackling sounds appear.
 smell of burning is recognisable.
 an overheating is recognisable (e.g. by discolouration of adjacent
surfaces).
Operate the product only after maintenance and examination by an
approved electrician!
2. USE AS DIRECTED
This product serves exclusively lighting purposes and may:
 only be operated using a suitable conventional transformer, output:
12V/AC.
 only be operated when firmly mounted.
 not be exposed to strong mechanical loads or to strong contamination.
 only be installed and operated after a condition inspection if the product
is dirty or has been moistened through storage.
 not be modified or converted.
3. OPERATION
 Replacing the light source: Under regular usage the LED bulb has an
extraordinary long lifetime. If nevertheless damage or failure occurs,
contact your local dealer to exchange the LED bulb.
4. MAINTANANCE AND CARE
The following environmental influences may have unwanted effects
on the surface of the product:
 acid rain and sour soil  high salt content in the air
 thawing salt  cleaning agents
 fertilizer especially in flowerbeds
 other chemical substances (e.g. herbicides)
Protect the product by adequate means to avoid unwanted changes of the
surface.
WARNING
Disconnect the product from the power supply and let it cool down,
before you do maintenance or clean the product.
 If disregarded there may be danger of electric shock or by burning
when cleaning the product.
 Cleaning: Clean the product on a regular basis using a slightly
moistened, soft and fluff-free cloth. Please take also notice of possibly
supplied notes on care and cleaning.
5. ADDITIONAL IMPORTANT NOTES
Storage: The product must be stored in a dry and clean environment. Do
not strain the product mechanically during storage.
Warranty: In case of a warranty contact your dealer.
Disposal: Notes on the correct disposal in Germany are found on
www.slv.de.
SLV Elektronik GmbH
ENGLISH
RECESSED GROUND FITTING
229311/17
Installation manual for the electrician
User manual for the user
Please read carefully and keep accessible for further
reference !
Technical Data:
Operating voltage: 12V/AC
Safety class: III
Safety type: IP67
Light source: 44 x LED
Power: 6W
Dimensions (Ø/H): 13/ 8,5 cm
Recess dim. (Ø/D): 16 / 8 cm
max. mech. load: 2000 kg
Surface temperature: 35 °C
Weight: 0,68 kg
Importer: SLV Elektronik GmbH
IP 67: Protection against dust(dust-tight) - Protection against the penetration
of water when temporarily submerged.
art.-no. 229311/17 01/2007
© SLV Elektronik GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg,
Germany, Tel. [phone]
Technical Details are subject to change.
USER MANUAL for RECESSED GROUND FITTING
229311/17