Specification Sheet

Description
Exposed Bedpan Washer Water Closet Flushometer with Dual Flush Feature, for floor
mounted or wall hung top spud bowls.
Flush Cycle
Model WES BPW-1150-1.6/1.1 High Efficiency (DOWN - 1.6 gpf/ 6.0 Lpf,
UP - 1.1 gpf/ 4.2 Lpf)
Specifications
Dual Flush, Quiet, Exposed, Diaphragm Type, Chrome Plated Closet Flushometer with the
following features:
• Lifting Handle UP initiates reduced flush (1.1 gpf/4.2 Lpf), eliminating liquid and paper
waster, saving a ½-gallon of water
• Pushing Handle DOWN initiates full flush (1.6 gpf/6.0 Lpf), eliminating all waste
• Reduces water volume by up to 30% when activated UPWARDS
• PERMEX
®
Synthetic Rubber Diaphragm with Dual Filtered Fixed Bypass
• Antimicrobial Coating on Handle Protects Against Germs
• Distinctive Green ADA Compliant Metal Non-Hold-Open Handle with Triple Seal Handle
Packing signifies Water Conserving Device
• 1” I.P.S. Screwdriver Bak-Chek
®
Angle Stop with Vandal Resistant Stop Cap
• Adjustable Tailpiece
• 1 ½” Offset Flush Tube
• Vacuum Breaker with Flush Connection
• Spud Coupling and Spud Flange for 1½” Top Spud
• Sweat Solder Adapter with Cover Tube and Cast Wall Flange
• High Copper, Low Zinc Brass Castings for Dezincification Resistance
• Non-Hold-Open Handle and No External Volume Adjustment to Ensure Water
Conservation
• Flush Accuracy Controlled by CID™ Technology
• Diaphragm, Handle Packing, Stop Seat and Vacuum Breaker Molded from PERMEX
®
Rubber Compound for Chloramine Resistance
• Includes two (2) adhesive backed Metal Wall Plates etched with instructions
Bedpan Washer Diverter Assembly with the following features:
• Solid One-piece Body Construction
• Solid Brass Spray Arm
• Counter Balanced Pivot Assembly
• Diverter Valve Wall Support
Valve Body, Cover, Tailpiece and Control Stop shall be in conformance with ASTM Alloy
Classification for Semi-Red Brass. Valve shall be in compliance to the applicable sections
of ASSE 1037. Installation meets ADA height requirements.
Variations
£ YI
Two Wall Bumpers (for open front seat without cover)
£ YO
Bumper on Angle Stop (for open front seat without cover)
£ O
1 ½” Offset Flush Tube Standard-Specify if 2” is Required
SLOAN VALVE COMPANY • 10500 SEYMOUR AVE. • FRANKLIN PARK, IL 60131
Ph: 1-800-9-VALVE-9 or 1-847-671-4300 • Fax: [phone] or 1-847-671-4380
www.sloanvalve.com
Bedpan Washer
Dual Flush
Flushometer
u
u
u
The information contained in this document is subject to change without notice.
WES BPW-1150 08-13
Copyright © 2013 SLOAN VALVE COMPANY
u
WES
BPW-1150
This space for Architect/Engineer approval
Job Name Date
Model Specified Quantity
Variations Specified
Customer/Wholesaler
Contractor
Architect
The Fastest Way to
Start Saving Water!
B
u
y
A
m
e
r
i
c
a
n
A
c
t
•
•
C
o
m
p
l
i
a
n
t
B
u
y
A
m
e
r
i
c
a
n
A
c
t
•
•
C
o
m
p
l
i
a
n
t