Spec Sheet

UPPERCUT® MANUAL SPECIALTY FLUSHOMETER
WES BPW 1150-1.6/1.1
Sloan 10500 Seymour Ave, Franklin Park, IL 60131
Phone: [phone] • Fax: [phone] • sloan.com
Code 3729700 • Downloaded 06/29/21 • 07/28/20 • View Latest Version
Page 1 of 2
CODE NUMBER
3729700
DESCRIPTION
1.6/1.1 gpf, Polished Chrome Finish, Fixture Connection Top Spud,
Single Flush, UPPERCUT® Exposed Manual Specialty Water Closet
Bedpan Washer Flushometer.
DETAILS
Flush Volume: 1.6/1.1 gpf (6.0/4.2 Lpf)
Finish: Polished Chrome (CP)
Valve: Diaphragm
Valve Body Material: Semi-red Brass
Fixture Type: Water Closet
Fixture Connection: Top Spud
Rough-In Dimension: 26 ½" (673mm)
Spud Coupling: 1 ½" (38mm)
Supply Pipe: 1" (25mm)
FEATURES
Pushing Handle DOWN initiates full flush (1.6 gpf/6.0 Lpf),
eliminating all waste
Reduces water volume by up to 30% when activated UPWARDS
Antimicrobial Coating on Handle Protects Handle Against Germs
Metal Non-Hold-Open Handle with Triple Seal Handle Packing
1” I.P.S. Screwdriver Bak-Chek® Angle Stop with Vandal Resistant
Stop Cap
Vacuum Breaker with Flush Connection
Spud Coupling and Spud Flange for 11⁄2” Top Spud
Sweat Solder Adapter with Cover Tube and Cast Wall Flange
Non-Hold-Open Handle and No External Volume Adjustment to
Ensure Water Conservation
Stop Seat and Vacuum Breaker molded from PERMEX® Rubber
Compound for Chloramine Resistance
Includes two (2) adhesive backed Metal Wall Plates etched with
Instructions
Bedpan Washer Diverter Assembly with the following features:
Solid One-piece Body Construction
Solid Brass Spray Arm
Counter Balanced Pivot Assembly and Diverter Valve Wall Support
1 1/2” Offset Flush Tube
Infrared Sensor with Multiple-focused, Lobular Sensing Fields for
high and low target detection
Variation Not Shown: 1.25" Flush Connection
COMPLIANCES & CERTIFICATIONS
(ADA Compliant, BAA Compliant, BREEAM Water Credit, cUPC
Certified, Green Globes Water Credit)
RECOMMENDED SPECIFICATION
Valve Body, Cover, Tailpiece and Control Stop shall be in
conformance with ASTM Alloy Classification for Semi- Red
Brass. Valve shall be in compliance with the applicable
sections of ASSE 1037 and ANSI/ASME 112.19.2.
VALVE OPERATING PRESSURE (FLOWING)
15 – 80 PSI (103 – 552 kPa). Specific fixtures may require greater
minimum flowing pressure - consult manufacturer
requirements.
DOWNLOADS
Control Stop Repair and Maintenance Guide
Flush Connections Flanges Repair and Maintenance Guide
Tail Piece Repair and Maintenance Guide
Slimline Bedpan Washer Repair and Maintenance Guide
Additional Downloads
NOTES
All information contained within this document subject to
change without notice.
Looking for other variations of the WES BPW 1150 product?
View the general spec sheet with all options.
Find a compatible urinal for this flushometer.
Find a compatible water closet for this flushometer.