Specification Sheet

SLOAN • 10500 SEYMOUR AVENUE • FRANKLIN PARK, IL 60131
Ph: 1-800-9-VALVE-9 • Fax: [phone] • www.sloanvalve.com
Dual-Flush
Flushometer
This space for Architect/Engineer approval
The information contained in this document is subject to change without notice.
WES-111 10-13
© 2013 SLOAN VALVE COMPANY
WES-111
Description
Exposed Water Closet Flushometer with Dual Flush Feature, for floor mounted or wall hung top
spud bowls.
Flush Cycle
WES-111 High Efficiency (Down 1.6 gpf/6.0 Lpf, Up 1.1 gpf/4.2 Lpf)
Specifications
Dual Flush, Quiet, Exposed, Diaphragm Type, Chrome Plated Closet Flushometer with the
following features:
• Lifting Handle UP initiates reduced flush (1.1 gpf/4.2 Lpf), eliminating liquid and paper
waste, saving a ½-gallon of water
• Pushing Handle DOWN initiates full flush (1.6 gpf/6.0 Lpf), eliminating all waste
• Reduces water volume by up to 30% when activated UPWARDS
• SaniGuard
®
Antimicrobial Coating protects handle and socket*
• PERMEX
®
Synthetic Rubber Diaphragm with Dual Filtered Fixed Bypass
• Distinctive Green ADA Compliant Metal Non-Hold-Open Handle with Triple Seal Handle
Packing signifies Water Conserving Device
• 1” I.P.S. Screwdriver Bak-Chek
®
Angle Stop with Free Spinning Vandal Resistant Stop Cap
• Adjustable Tailpiece
• High Back pressure vacuum breaker flush connection w/ one-piece bottom hex coupling nut
• Spud Coupling and Flange for 1½” Top Spud
• Sweat Solder Adapter with Cover Tube and Cast Set Screw Wall Flange
• High Copper, Low Zinc Brass Castings for Dezincification Resistance
• Non-Hold-Open Handle, Fixed Metering Bypass and No External Volume Adjustment to
Ensure Water Conservation
• Flush Accuracy Controlled by CID Technology
• Diaphragm, Handle Packing, Stop Seat and Vacuum Breaker molded from PERMEX Rubber
Compound for Chloramine Resistance
• Includes two (2) adhesive backed Metal Wall Plates etched with Instructions
Valve Body, Cover, Tailpiece and Control Stop shall be in conformance with ASTM Alloy
Classification for Semi-Red Brass. Valve shall be in compliance to the applicable sections of
ASSE 1037.
* SaniGuard does not protect users or others against disease-causing bacteria
Variations
£ TP Trap Primer
£ YG Extended Bumper on Angle Stop (for seat with cover)
£ YO Bumper on Angle Stop (for open front seat without cover)
Accessories
See Accessories Section of the Sloan catalog for details on these and other Flushometer
variations.
Fixtures
Consult Sloan for Sloan brand matching fixture options.
Manufactured in the U.S.A. by Sloan Valve Company under one or more of the following
patents: 7,607,635; 8,033,522; 8,042,787. Other Pats. Pending.
The Fastest Way to Start
Saving Water!
Listed by I.A.P.M.O