Dimensions Guide
SLOAN VALVE COMPANY • 10500 SEYMOUR AVE. • FRANKLIN PARK, IL. 60131
Ph: 1-800-9-VALVE-9 or 1-847-671-4300 • Fax: 1-800-447-8329 or 1-847-671-4380
www.sloanvalve.com
Dual Flush
Flushometer
u
u
u
u
This space for Architect/Engineer approval
The information contained in this document is subject to change without notice.
WES-111 Dual Flush Flushometer S.S. — Rev. 1 (07/10)
Copyright © 2010 SLOAN VALVE COMPANY
Description
Exposed Water Closet Flushometer with Dual Flush Feature, for floor mounted or wall
hung top spud bowls.
Flush Cycle
WES-111 High Efficiency (Down 1.6 gpf/6.0 Lpf, Up 1.1 gpf/4.2 Lpf)
Specifications
Dual Flush, Quiet, Exposed, Diaphragm Type, Chrome Plated Closet Flushometer with the
following features:
• Lifting Handle UP initiates
reduced
flush (1.1 gpf/4.2 Lpf), eliminating liquid and paper
waste, saving a ½-gallon of water
• Pushing Handle DOWN initiates
full
flush (1.6 gpf/6.0 Lpf), eliminating all waste
• Reduces water volume by up to 30% when activated UPWARDS
• Antimicrobial Coating on Handle protects against germs
• PERMEX™ Synthetic Rubber Diaphragm with Dual Filtered Fixed Bypass
• Distinctive Green ADA Compliant Metal Non-Hold-Open Handle with Triple Seal Handle
Packing signifies Water Conserving Device
• 1” I.P.S. Screwdriver Bak-Chek™ Angle Stop
• Free Spinning Vandal Resistant Stop Cap
• Adjustable Tailpiece
• High Back Pressure Vacuum Breaker Flush Connection with One-piece Bottom Hex
Coupling Nut
• Spud Coupling and Flange for 1½” Top Spud
• Sweat Solder Adapter with Cover Tube and Cast Set Screw Wall Flange
• High Copper, Low Zinc Brass Castings for Dezincification Resistance
• Non-Hold-Open Handle, Fixed Metering Bypass and No External Volume Adjustment to
Ensure Water Conservation
• Flush Accuracy Controlled by CID™ Technology
• Diaphragm, Handle Packing, Stop Seat and Vacuum Breaker molded from PERMEX™
Rubber Compound for Chloramine Resistance
• Includes two (2) adhesive backed Metal Wall Plates etched with Instructions
Valve Body, Cover, Tailpiece and Control Stop shall be in conformance with ASTM Alloy
Classification for Semi-Red Brass. Valve shall be in compliance to the applicable sections
of ASSE 1037.
Variations
£ TP
Trap Primer
£ YG
Extended Bumper on Angle Stop (for seat with cover)
£ YO
Bumper on Angle Stop (for open front seat without cover)
Accessories
See Accessories Section of the Sloan catalog for details on these and other Flushometer
variations.
Fixtures
Consult Sloan for Sloan brand
matching fixture options.
The Fastest Way to
Start Saving Water!
Patent Pending
u
u
B
u
y
A
m
e
r
i
c
a
n
A
c
t
•
•
C
o
m
p
l
i
a
n
t
B
u
y
A
m
e
r
i
c
a
n
A
c
t
•
•
C
o
m
p
l
i
a
n
t