Specification Sheet

ManualsBrandsSloan ManualsFlushometer ValvesSloan Dual Cycle (1.6 / 1.1 GPF) Exposed, Battery Powered, Sensor Activated Sloan ECOS™ Electronic Dual Flush Model Water Closet Flushometer for Floor Mounted or Wall Hung 1-1/2" Top Spud Bowls



This space for Architect/Engineer approval

Job Name Date

Model Specified Quantity

Variations Specified

Customer/Wholesaler

Contractor

Architect

The information contained in this document is subject to change without notice.

Sloan ECOS™ Electronic Dual Flush 8111 S.S. — Rev.0a (01/08)

Description

Exposed, Battery Powered, Sensor Activated Sloan ECOS™ Electronic

Dual Flush Model Water Closet Flushometer for floor mounted or wall hung

top spud bowls.

Flush Cycle

 Full Flush (Large Button) / 1.6 gpf/6.0 Lpf

 Reduced Flush (Small Button) / 1.1 gpf/4.2 Lpf

Specifications

Quiet, Exposed, Diaphragm Type, Chrome Plated Closet Flushometer for

either left or right hand supply with the following features:

• If the user is present for less than one minute and leaves the sensing

zone or chooses the small override button, a reduced fl ush initiates

(1.1 gpf/4.2 Lpf) eliminating liquid and paper waste, saving 1/2 gallon of

water

• If the user is present for greater than one minute and leaves the zone or

chooses the large override button, the full fl ush initiates (1.6 gpf/6.0 Lpf)

eliminating solid waste and paper

• Reduces water volume by up to 30% when a reduced flush occurs

• PERMEX™ Synthetic Rubber Diaphragm with twin linear filtered bypass

and vortex cleansing action

• Flex Tube Diaphragm designed for improved life and reduced

maintenance

• ADA Compliant Sloan ECOS™ Electronic Dual Flush Battery Powered

Infrared Sensor for automatic “No Hands” operation

• Infrared Sensor with Multiple-focused, Lobular Sensing Fields for high

and low target detection

• Latching Solenoid Operator

• Engineered Metal Cover with replaceable Lens Window

• User friendly three (3) second Flush Delay

• Courtesy Flush™ Override Button

• Four (4) Size AA Batteries factory installed

• “Low Battery” Flashing LED

• Infrared Sensor Range Adjustment Screw

• Initial Set-up Range Indicator Light (first 10 minutes)

• Chrome Plated Metal Handle Cap

• 1” I.P.S. Screwdriver Bak-Chek

Angle Stop

• Free Spinning, Vandal Resistant Stop Cap

• Adjustable Tailpiece

• High Back Pressure Vacuum Breaker Flush Connection with One-piece

Bottom Hex Coupling Nut

• Spud Coupling and Flange for 1½” Top Spud

• Sweat Solder Adapter w/Cover Tube and Cast Wall Flange w/Set Screw

• High Copper, Low Zinc Brass Castings for Dezincification Resistance

• Fixed Metering Bypass and No External Volume Adjustment to Ensure

Water Conservation

• Flush Accuracy Controlled by CID™ Technology

• Diaphragm, Stop Seat and Vacuum Breaker molded from PERMEX™

Rubber Compound for Chloramine resistance

• 100% of the energy used in manufacturing is offset with Renewable

Energy Sources – Wind Energy

Valve Body, Tailpiece and Control Stop shall be in conformance with ASTM

Alloy Classification for Semi-Red Brass. Valve shall be in compliance with

the applicable sections of ASSE 1037, ANSI/ASME A112.19.2 and Military

Specification V-29193. Installation conforms to ADA requirements.

Special Finishes

 PB Polished Brass (PVD Finish)



Gold Plate (PVD Finish)



Brushed Nickel (PVD Finish)



SF Satin Chrome

See Accessories Section and Sloan ECOS™ Electronic Dual Flush

Accessories Section of the Sloan catalog for details on these and other

Sloan ECOS™ Electronic Dual Flush Flushometer variations.

ADA Compliant

Manual Operation

Sloan ECOS™ Electronic Dual Flush Flushometers

incorporate intuitive Split-button design for easy manual

activation. The small button controls the reduced flush

cycle (1.1 gpf/4.2 Lpf), the large button controls the full

flush cycle (1.6 gpf/6.0 Lpf). Straightforward graphics

alert user to proper activation. Reduced flush for liquid

waste, full flush for solid waste. To further educate the

user, two (2) instructional wall plates are included with

each Sloan ECOS™ Flushometer.

Automatic Operation

Sloan ECOS™ Electronic Dual Flush Flushometers can

also be activated via multi-lobular infrared sensor. By

detecting user presence and duration, the Sloan

ECOS™ Smart Sense Technology™ will determine the

proper flush volume for unequalled water efficiency.

Functional & Hygienic

Touchless, sensor operation eliminates the need for

user contact to help control the spread of infectious

diseases. The Sloan ECOS™ Electronic Dual Flush

Flushometers are provided with Reduced or Full Flush

Override Buttons to allow a “courtesy

flush” for individual user comfort.

Warranty

3 year (limited)



Made with

Renewable Energy

Summary of content (2 pages)

PAGE 1
Description Flush Cycle Specifications Exposed, Battery Powered, Sensor Activated Sloan ECOS™ Electronic Dual Flush Model Water Closet Flushometer for floor mounted or wall hung top spud bowls. Full Flush (Large Button) / 1.6 gpf/6.0 Lpf Reduced Flush (Small Button) / 1.1 gpf/4.
PAGE 2
Description Flush Cycle Exposed, Battery Powered, Sensor Activated Sloan ECOS™ Electronic Dual Flush Model Water Closet Flushometer for floor mounted or wall hung top spud bowls. Full Flush (Large Button) / 1.6 gpf/6.0 Lpf Reduced Flush (Small Button) / 1.1 gpf/4.