Specification Sheet

ManualsBrandsSloan ManualsFlushometer ValvesSloan Exposed, Battery Powered, Sensor Activated Sloan ECOS Electronic Dual Flush Model Flushometer

This space for Architect/Engineer approval

Job Name Date

Model Specified Quantity

Variations Specified

Customer/Wholesaler

Contractor

Architect

Sloan ECOS

Electronic Dual Flush 8137 S.S. — Rev. 0d (03/10)

The information contained in this document is subject to change without notice.

Description

Exposed, Battery Powered, Sensor Activated Sloan ECOS

Electronic Dual Flush Model

Water Closet Flushometer for back inlet squat toilets.

Flush Cycle

Full Flush (Large Button ) / 1.6 gpf/6.0 Lpf, Reduced Flush (Small Button) / 1.1 gpf/4.2 Lpf

Specifications

Quiet, Exposed, Diaphragm Type, Chrome Plated Closet Flushometer for either left or right

hand supply with the following features:

• If the user is present for less than one minute and leaves the sensing zone or chooses

he small override button, a reduced fl ush initiates (1.1 gpf/4.2 Lpf) eliminating liquid

and paper waste, saving 1/2 gallon of water

• If the user is present for greater than one minute and leaves the zone or chooses the

large override button, the full flush initiates (1.6 gpf/6.0 Lpf) eliminating solid waste and

paper

• Reduces water volume by up to 30% when a reduced flush occurs

• PERMEX™ Synthetic Rubber Flex Tube Diaphragm with twin linear filtered bypass and

vortex cleansing action designed for improved life and reduced maintenance

• ADA Compliant Sloan ECOS

Electronic Dual Flush Battery Powered Infrared Sensor for

automatic “No Hands” operation

• Infrared Sensor with Multiple-focused, Lobular Sensing Fields for high and low target

detection with adjustment screw for sensor range and indicator light (first 10 minutes)

• Latching Solenoid Operator

• Engineered Metal Cover with replaceable Lens Window

• User friendly three (3) second Flush Delay

• Courtesy Flush™ Override Button

• Four (4) Size AA Batteries factory installed

• “Low Battery” Flashing LED

• 1” I.P.S. Screwdriver Bak-Chek

Angle Stop

• Free Spinning, Vandal Resistant Stop Cap

• Adjustable Tailpiece

• High Back Pressure Vacuum Breaker Flush Connection with One-piece Bottom Hex

Coupling Nut

• Sweat Solder Adapter with Cover Tube and Cast Set Screw Wall Flange

• High Copper, Low Zinc Brass Castings for Dezincification Resistance

• Fixed Metering Bypass and No External Volume Adjustment to Ensure Water

Conservation

• Flush Accuracy Controlled by CID™ Technology

• Diaphragm, Stop Seat and Vacuum Breaker molded from PERMEX™ Rubber Compound

for Chloramine resistance

Valve Body, Tailpiece and Control Stop shall be in conformance with ASTM Alloy

Classification for Semi-Red Brass. Valve shall be in compliance with the applicable sections

of ASSE 1037. Installation conforms to ADA requirements.

Variations

1¼” Flush Connection

XYV

Less Vacuum Breaker

Split Ring Pipe Support

Solid Ring Pipe Support

Special Finishes

Polished Brass (PVD Finish)

Brushed Nickel (PVD Finish)

Satin Chrome

NOTE: Bak-Chek

Angle Stop available with 1” Whitworth Thread (please specify).

Accessories

See Accessories Section and Sloan ECOS

Accessories Section of the Sloan catalog for

details on these and other Sloan ECOS

Electronic Dual Flush Flushometer variations.

ADA Compliant

Manual Operation

Sloan ECOS

Electronic Dual Flush Flushometers incorporate

intuitive Split-button design for easy manual activation. The small

button controls the

reduced

flush cycle (1.1 gpf/4.2 Lpf), the large

button controls the

full

flush cycle (1.6 gpf/6.0 Lpf). Straightforward

graphics alert user to proper activation. Reduced flush for liquid

waste, full flush for solid waste. To further educate the user, two (2)

instructional wall plates are included with each Sloan ECOS

Flushometer.

Automatic Operation

Sloan ECOS

Electronic Dual Flush Flushometers can also be

activated via multi-lobular infrared sensor. By detecting user

presence and duration, the Sloan ECOS

Smart Sense

Technology™ will determine the proper flush volume for

unequalled water efficiency.

Functional & Hygienic

Touchless, sensor operation eliminates the need for user contact to

help control the spread of infectious diseases. The Sloan ECOS®

Electronic Dual Flush Flushometers are provided with

Reduced

Full

Flush Override Buttons to allow a “courtesy flush” for individual

users comfort.

Warranty

3 year (limited)

Patented

D598,976

Made with

Renewable Energy

Made with

Renewable Energy

Hecho con

Energía Renovable

Hecho con

Energía Renovable

Spanish

Listed by I.A.P.M.O.

LISTED 376U

Sloan Valve Company is buying renewable energy

certicates to meet 100% of the company’s purchased

electricity use at its Franklin Park, Illinois facility.

•

Summary of content (2 pages)

PAGE 1
u £ PB Polished Brass (PVD Finish) £ BN Brushed Nickel (PVD Finish) Satin Chrome £ SF NOTE: Bak-Chek® Angle Stop available with 1” Whitworth Thread (please specify). n t t Buy plia ADA Compliant Manual Operation Sloan ECOS® Electronic Dual Flush Flushometers incorporate intuitive Split-button design for easy manual activation. The small button controls the reduced flush cycle (1.1 gpf/4.2 Lpf), the large button controls the full flush cycle (1.6 gpf/6.0 Lpf).
PAGE 2
u u u Description Exposed, Battery Powered, Sensor Activated Sloan ECOS® Electronic Dual Flush Model Water Closet Flushometer for back inlet squat toilets. Flush Cycle OPERATION 1. A continuous, invisible light beam is emitted from the Sloan ECOS® Dual Flush Sensor. Full Flush (Large Button ) / 1.6 gpf/6.0 Lpf, Reduced Flush (Small Button) / 1.1 gpf/4.