Spec Sheet

ELONGATED FLOOR-MOUNTED REAR OUTLET WATER CLOSET
ST-2229
Sloan 10500 Seymour Ave, Franklin Park, IL 60131
Phone: [phone] • Fax: [phone] • sloan.com
Code 2102229 • Downloaded 07/02/21 • 11/10/20 • View Latest Version
Page 1 of 2
CODE NUMBER
2102229
DESCRIPTION
Vitreous China Floor-Mounted Rear Outlet Water Closet.
DETAILS
Flush Volume: 1.28 – 1.6 gpf (4.8 – 6.0 Lpf)
Flush volume determined by the flushometer used with the fixture
Rim Height: 16 ½" (419mm)
Nominal Dimensions: 26 ¾" × 14" × 16 ½" (679 × 356 × 419mm)
FEATURES
White Vitreous China
Universal model works with Sloan flushometers from 1.1 to 1.6 gpf
Elongated bowl
Floor mounted, rear outlet
Water spot area: 10¼" x 8" (26 cm x 24 cm)
1½" I.P.S. top spud inlet
2⅛" fully glazed trapway
Syphonjet flushing achieves up to 1000g Map Scores when used
with Sloan flushometers
Closet bolts and caps included
Toilet seat not included
RECOMMENDED SEATS
Bemis - 1955CT/1955SSCT & 2155CT/2155SSCT
Church - 295CT/295SSCT & 2155CT/2155SSCT
PLUMBING SYSTEM REQUIREMENTS
Minimum Flowing Pressure: 25 PSI (172 kPa)
Maximum Static Pressure: 80 PSI (552 kPa)
DOWNLOADS
HET ST-2229 Series Installation Instructions
SS/ST/SU/WETS/WEUS Fixtures Repair and Maintenance Guide
Additional Downloads
COMPLIANCES & CERTIFICATIONS
(ADA Compliant, CEC Compliant, cUPC Certified, WaterSense
Listed)
NOTES
All information contained within this document subject to
change without notice.
All vitreous china dimensions shown in these drawings are
nominal and not to scale. Dimensions can vary within the
tolerances established in the governing ASME A112.19.2/CSA
B45.1standard. It is important to consider this when planning
rough-in and plumbing layouts.
Static load tested according to the procedure outlined in
Section 6.7 of ASME A112.19.2. Not recommended for bariatric
use.
Find a compatible flushometer for this water closet.
WaterSense compliant when used with a WaterSense
compliant flushometer