Spec Sheet

WATER CLOSET & FLUSHOMETER COMBO
WETS-2020.1301
Sloan 10500 Seymour Ave, Franklin Park, IL 60131
Phone: [phone] • Fax: [phone] • sloan.com
Code 20201301 • Downloaded 07/02/21 • 08/27/20 • View Latest Version
Page 1 of 2
CODE NUMBER
20201301
DESCRIPTION
ST-2029 Water Closet and ROYAL 111 ESS Flushometer.
COMPONENTS
Flushometer: Code 3450049
Water Closet: Code 2102029
DETAILS
Flush Volume: 1.28 gpf (4.8 Lpf)
Nominal Dimensions: 26 ¾" × 14" × 17" (679 × 356 × 432mm)
FLUSHOMETER FEATURES
PERMEX® Synthetic Rubber Diaphragm with Dual Filtered Fixed
Bypass
Handle Packing, Main Seat, Stop Seat and Vacuum Breaker Molded
from PERMEX® Rubber Compound for Chloramine resistance
User friendly three (3) second Flush Delay
Sweat Solder Adapter w/Cover Tube and Cast Wall Flange w/Set
Screw
OPTIMA® EL-1500 Self-Adaptive Infrared Sensor with Indicator Light
Die Cast Sensor Plate with no visible Fasteners (for 2-gang
Electrical Box)
High Back Pressure Vacuum Breaker Flush Connection with One-
Piece Bottom Hex Coupling Nut, Spud Coupling and Flange for 11⁄2”
Top Spud
Non-Hold-Open Integral Solenoid Operator, Fixed Metering Bypass
and No External Volume Adjustment to Ensure Water Conservation
Courtesy Flush® Override Button
1” I.P.S. Screwdriver Bak-Chek® Angle Stop with Free Spinning
Vandal Resistant Stop Cap
FIXTURE FEATURES
White Vitreous China
Elongated bowl
Floor mounted, floor outlet
Siphon jet flushing action achieves 1000g Map score when used
with any Sloan flushometer
Water spot area: 10⅛" x 9⅜" (26 cm x 24 cm)
1½" I.P.S. top spud inlet
2⅛" fully glazed trapway
Closet bolts and caps included
Toilet seat not included
Static load rating of 1000 lbs. (See Notes)
COMPLIANCES & CERTIFICATIONS
(BREEAM Water Credit, Green Globes Water Credit, LEED V4
Water Efficiency Credit, Satisfies LEED Credits, WaterSense
Listed, BAA Compliant)
DOWNLOADS
SS/ST/SU/WETS/WEUS Fixtures Repair and Maintenance
Guide
Additional Downloads
NOTES
All information contained within this document subject to
change without notice.
Static load tested according to the procedure outlined in
Section 6.7 of ASME A112.19.2. Not recommended for bariatric
use.