Spec Sheet

WATER CLOSET & FLUSHOMETER COMBO
WETS-2002.1020
Sloan 10500 Seymour Ave, Franklin Park, IL 60131
Phone: [phone] • Fax: [phone] • sloan.com
Code 20021020 • Downloaded 07/02/21 • 06/25/21 • View Latest Version
Page 1 of 2
CODE NUMBER
20021020
DESCRIPTION
ST-2009 Water Closet and SLOAN WES 115 Flushometer.
COMPONENTS
Flushometer: Code 3760003
Water Closet: Code 2102009
DETAILS
Flush Volume: 1.6/1.1 gpf (6.0/4.2 Lpf)
Nominal Dimensions: 26 ¾" × 14" × 15" (679 × 356 × 381mm)
FLUSHOMETER FEATURES
Lifting Handle UP initiates reduced flush (1.1 gpf/4.2 Lpf),
eliminating liquid and paper waste, saving a 1⁄2-gallon of water
Pushing Handle DOWN initiates full flush (1.6 gpf/6.0 Lpf),
eliminating all waste
Metal Non-Hold-Open Handle with Triple Seal Handle Packing
Sweat Solder Adapter with Cover Tube & Cast Wall Flange with Set
Screw
Non-Hold-Open Handle, Fixed Metering Bypass and No External
Volume Adjustment to Ensure Water Conservation Diaphragm
Handle Packing and Vacuum Breaker to be molded from PERMEX®
Rubber Compound for Chloramine Resistance
Includes two (2) adhesive backed Metal Wall Plates etched with
Instructions
FIXTURE FEATURES
White Vitreous China
Elongated bowl
Floor mounted, floor outlet
Siphon jet flushing action achieves 1000g Map score when used
with any Sloan flushometer
Water spot area: 10⅛" x 9⅜" (26 cm x 24 cm)
1½" I.P.S. top spud inlet
2⅛" fully glazed trapway
Closet bolts and caps included
Toilet seat not included
Static load rating of 1000 lbs. (See Notes)
WaterSense compliant when used with a WaterSense compliant
flushometer
COMPLIANCES & CERTIFICATIONS
(BREEAM Materials Credit, BREEAM Water Credit, EPD, Green
Globes Materials & Resources Credit, Green Globes Water
Credit, HPD, LEED Materials & Resources EPD Credit, LEED
Materials & Resources HPD Credit, Satisfies LEED Credits, BAA
Compliant, WELL Building Standards)
DOWNLOADS
Sloan Exposed Installation Instructions
SS/ST/SU/WETS/WEUS Fixtures Repair and Maintenance
Guide
Additional Downloads
NOTES
All information contained within this document subject to
change without notice.
Static load tested according to the procedure outlined in
Section 6.7 of ASME A112.19.2. Not recommended for bariatric
use.