Specification Sheet

DESCRIPTION
Complete HEU system with exposed, AC powered, sensor
activated, Royal
®
OPTIMA
®
SMOOTH
™
hardwired urinal
Flushometer and vitreous china urinal.
Flush Cycle
Model WEUS 1002.1302-0.25 HWS (0.25 gpf/0.9 Lpf)
Code: 10021302
This space for Architect/Engineer approval
Job Name Date
Model Specified Quantity
Variations Specified
Customer/Wholesaler
Contractor
Architect
FEATURES
ADA Compliant
Automatic
Sloan SMOOTH
™
equipped Flushometers provide the
ultimate in sanitary protection and automatic operation.
The Flushometer operates by means of an AC powered
infrared sensor. True mechanical manual over-ride
button enables the Flushometer to work in the event of
a power failure. State-of-the-art technology enables
activation of a manual override without “double
flushing” occurring as the user departs (locks out
sensor for approximately 10 seconds).
Hygienic
The Royal
®
OPTIMA
®
SMOOTH
™
Flushometer System is
the next advancement in hygiene. User makes no
physical contact with the Flushometer surface except to
initiate the Mechanical Manual Override Flush Handle
when required. Helps control the spread of infectious
diseases.
Economical
Automatic operation provides water usage savings
over other flushing devices. Reduces maintenance
and operation costs.
Warranty
3 year (limited)
The information contained in this document is subject to change without notice.
Sloan Valve Company
10500 Seymour Avenue
Franklin Park, IL 60131
Phone: 1-800-9-VALVE-9 (982-5839)
or 1-847-671-4300
Fax: [phone] or 1-847-671-4380
www.sloanvalve.com
Copyright © 2013 Sloan Valve Company
WEUS-1002.1302 11-13
SPECIFICATIONS
Quiet, exposed, diaphragm type, chrome plated urinal
Flushometer and vitreous china urinal with the following
features:
Flushometer
• PERMEX
®
Synthetic Rubber Diaphragm with
Dual Filtered Fixed Bypass
• ADA compliant metal oscillating Non-Hold-Open
Handle with Triple Seal Handle Packing
• 3/4” I.P.S. Screwdriver Bak-Chek
®
Angle Stop
• Spud Coupling and Flange for 3/4” Top Spud
• Sweat Solder Adapter w/Cover Tube and Cast
Wall Flange w/Set Screw
• High copper, low zinc brass castings for
dezincification resistance
• Non-Hold-Open Handle, Fixed Metering Bypass
and no external volume adjustment to ensure
water conservation
• Flush accuracy controlled by CID
®
technology
• Diaphragm, Handle Packing, Stop Seat and
Vacuum Breaker molded from PERMEX
®
rubber
compound for chloramine resistance
• Valve Body, Cover, Tailpiece and Control Stop shall
be in conformance with ASTM Alloy Classification
for Semi-Red Brass. Valve shall be in compliance
to the applicable sections of ASSE 1037/ ASME
A112.19.2/CSA B45.1
OPTIMA
®
SMOOTH
™
Unit
• ADA compliant OPTIMA
®
SMOOTH
™
AC powered
infrared sensor for automatic “Hands-free” operation
• Sensor with automatic range adjustment
• Chrome plated metal sensor housing
• Mechanical Manual Override Flush Handle
• “User in View” flashing LED
• 25 to 80 psi operating range
• Sentinel Flush Mode
• Chrome Plated Flange and appropriate Wiring
Hardware included
Urinal
• Wall hung vitreous china
• Washdown flushing action
• Vandal resistant strainer assembly included
• 3/4” I.P.S. top spud inlet
• 2” NPT outlet flange
• All mounting hardware included
• Integral flushing rim
• 100 % factory flush tested
• Compliant to the applicable sections
of ASME A112.19.2/cSA B45.1
• Carrier not included
Model
WEUS-1002.1302-0.25 HWS
OPTIMA
®
Systems AC Powered Sensor Activated HEU Flushometer and HEU Urinal
Efficiency Series
NOTE: Plumbing System Requirements
√ Minimum
Flowing
Pressure: 25 PSI
√ Maximum Fixture Static Pressure: 80 PSI
Meets the American Disabilities
Guidelines and ANSI
A117.1 requirements when installed
according to these requirements.