Specification

Repair Parts and Maintenance Guide
5
Product ID Guide
Flushometer Identification
Exposed Concealed Water Closet Urinal1. IDENTIFY
YOUR SLOAN
FLUSHOMETER
Identify our Sloan
ushometer from
the vacuum breaker,
cap, cover or from
identication label
at the bottom of the
valve body. (Sloan
parts only supplied).
CHOOSE YOUR FLUSHOMETER:
Hydraulic Diaphragm Flushometers (Pages 22-29) Manual Piston Flushometers (Pages 30-38)
Manual Self-Closing Flushometers (Pages 39-41) Slimline
®
Bedpan Washer (Pages 42-44)
(Chrome
Plated)
Known as
Regal
®
XL
(Since mid-
2010)
Crown II
®
is
OBSOLETE
(Rough
Brass
behind
wall)
(Check water inlet
at top or back of
xture. Typically
3.5 gpf to 1.6 gpf,
larger vacuum
breaker)
(Typically 1.0 gpf
or 0.5 gpf, smaller,
beveled vacuum
breaker, wall
mounted)
Royal
®
Series 900
®
Concealed Series 900
®
Exposed
Dolphin
®
Crown
®
/Crown II
®
Gem•2
®
Naval
®
Continental
®
Sloan
®
Regal
®
Royal II
®
IN ORDER FOR THE WATER CLOSET OR URINAL TO PERFORM PROPERLY FOR ITS INTENDED USE, YOU MUST FOLLOW THESE INSTRUCTIONS:
A. IDENTIFY YOUR FLUSHOMETER MODEL NO.
B. CHECK FOR THE WATER CONSUMPTION LABEL ATTACHED TO FLUSHOMETER AND FIXTURE, ENSURING THEY MATCH.
C. REFER TO SPECIFIC FLUSHOMETER SECTION IN GUIDE FOR APPROPRIATE REPLACEMENT PART NO.
Manual Diaphragm Flushometers (Pages 11-21)
For electronic
components use
Sensor Flushometer
Section.