Installation Sheet

3
Step 2
Insert the Cartridge into the housing with
the logo at the 11 o’clock position.
FILL CARTRIDGE
Step 1
Pour half quart (half liter) or 1 pint of
water into the newly installed Cartridge.
Step 2
Remove the Sealant package from the box
and tear off the top.
Step 3
Pour Sealant into the Cartridge drain
opening, wipe off excess Sealant and
attach shield. The urinal is now ready
for use.
Step 3
Insert the Key into the top of Cartridge
and turn the Cartridge clockwise to the
12 o’clock position to lock it in place.
Remove the Key.
CARTRIDGE INSTALLATION
Step 1
Before inserting Cartridge, pour a gallon of
clean, hot soapy water into Housing to
flush it. Use hose if available.
IMPORTANT
STEP.
WATER FIRST
THEN SEALANT