Specification Sheet

►► Code NumberCode Number
10001403
►► DescriptionDescription
Complete HEU system with exposed, battery powered, sensor
activated, Royal® OPTIMA Plus® SMOOTH® urinal Flushometer and
vitreous china urinal fixture.
►► Flush CycleFlush Cycle
0.125 gpf/ 0.5 Lpf
►► SPECIFICATIONSSPECIFICATIONS
SpecificationsSpecifications
Quiet, exposed, diaphragm type, chrome plated urinal Flushometer
and vitreous china urinal with the following features:
Fixture SpecificationsFixture Specifications
Integral flushing rim
100 % factory flush tested
Wall hung vitreous china
Washdown flushing action
All mounting hardware included
Carrier not included
Vandal resistant strainer assembly included
Compliant to the applicable sections of ASME A112.19.2/CSA B45.1
¾” I.P.S. top spud inlet
2” NPT outlet flange
Flushometer SpecificationFlushometer Specification
Non-Hold-Open Operation
ADA compliant Solis solar powered infrared sensor for automatic
“Hands-free” operation
Infrared Sensor with Multiple-focused, Lobular Sensing Fields for high
and low target detection
Non-Hold-Open Handle, Fixed Metering Bypass and no external
volume adjustment to ensure water conservation
Flush accuracy controlled by CID® technology
Diaphragm, Stop Seat and Vacuum Breaker molded from PERMEX®
rubber compound for chloramine resistance
Sweat Solder Adapter w/Cover Tube and Cast Wall Flange w/Set
Screw
¾” I.P.S. Screwdriver Bak-Chek® Angle Stop
Valve Body, Cover, Tailpiece and Control Stop shall be in
conformance with ASTM Alloy Classification for Semi-Red Brass.
Valve shall be in compliance to the applicable sections of ASSE
1037/ ASME A112.19.2/CSA B45.1
Spud coupling and flange for 3/4” top Spud
PERMEX® Synthetic Rubber Diaphragm with Dual Bypass
OPTIMA Plus® SMOOTH® UnitOPTIMA Plus® SMOOTH® Unit
ADA compliant OPTIMA Plus® SMOOTH® battery powered infrared
sensor for automatic “Hands-free” operation
Mechanical Manual Override Flush Handle
Four (4) size C batteries included
“User in View” flashing LED
25 to 80 psi operating range
"Vandal resistant 1/8"" ball-type hex key included"
Sensor with automatic range adjustment
Chrome plated metal sensor housing
►► FEATURESFEATURES
AutomaticAutomatic
Sloan SMOOTH® equipped Flushometers provide the ultimate in
sanitary protection and automatic operation. There is no need for
Ac hookups or wall alterations. The Flushometer operates by means
of a battery powered infrared sensor. True mechanical manual
override button enables the Flushometer to work in the event of a
power failure. State-of-the-art technology enables activation of a
manual override without “double flushing” occurring as the user
departs (locks out sensor for approximately 10 seconds).
HygienicHygienic
The Royal® OPTIMA® SMOOTH® Flushometer System is the next
advancement in hygiene. User makes no physical contact with the
Flushometer surface except to initiate the Mechanical Manual
Override Flush Handle when required. Helps control the spread of
infectious diseases.
EconomicalEconomical
Sloan installed batteries speed installation and provide years of
metered flushing to control the use of water and energy. Batteries
can be changed without turning off the water.
►► NOTENOTE
Plumbing System Requirements
Minimum Flowing Pressure: 25 PSI / Minimum Flow Rate: 18 GPM /
Maximum Fixture Static Pressure: 80 PSI
Maximum Fixture Static Pressure: 80 PSI
►► Compliance & CertificationsCompliance & Certifications
ASME A112.1.3
This space for Architect/Engineer Approval
Sloan Standard Washdown Urinal
WEUS-1000.1403-0.125 SMOOTH
2016-07-12 Page 1 of 2
SLOAN 10500 SEYMOUR AVE. ● FRANKLIN PARK, ● IL. SLOAN 10500 SEYMOUR AVE. ● FRANKLIN PARK, ● IL. 60131 60131
Ph: 1-800-9-VALVE-9 or 1-847-671-4300 ● Fax: [phone] or 1-847-671-4380 ● http://www.sloan.com