Specification Sheet

Description
Below Deck Thermostatic Water Mixing Valve for use with a single Sloan
Optima
®
faucet.
Model
 Model MIX-135-A
Supplied with Sloan Optima
®
and Optima Plus
®
faucets that are specified with
the “BDT” (Below Deck Thermostatic) variation, or available separately.
Specifications
Thermostatic Water Mixing Valve with the following features:
• Designed for under-the-lavatory applications where the outlet temperature of
hot water must be controlled for safe, economic use.
• Installs in place of the Tee fitting supplied with the faucet prior to the
solenoid valve.
• Designed to quickly sense and compensate for temperature fluctuations
induced by water temperature and pressure changes in the supply line.
• Rugged construction features solid brass valve body and corrosion resistant
internal components.
• Water temperature adjustment stem with lock nut to prevent tampering.
• Equipped with integral check valves at inlets.
• 3/8” compression connection on inlets and outlet
• Meets all the performance standards of ASSE 1016 and CSA B125.
• Capacity — standard: . . . . . . . . . . . . . . . . . . . . . . . . . . 4.0 gpm (15.0 Lpm) †
• Maximum hot water supply temperature: . . . . . . . . . . . . . . . . 212° F (100° C)
• Minimum hot water supply temperature: . . . . . . 5° F (2.8° C) above set point
• Maximum operating pressure: . . . . . . . . . . . . . . . . . . . . . . 125 psig (862 kPa)
• Maximum static pressure: . . . . . . . . . . . . . . . . . . . . . . . . . 125 psig (862 kPa)
• Temperature range — standard:
ASSE Type T/P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95°-110° F (35°-48° C)
Type T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80°-120° F (27°-49° C)
• Minimum flow — standard: . . . . . . . . . . . . 0.5 gpm (2.2 Lpm) to ASSE 1016
• Factory set: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105° F (40° C)
The MIX-135-A Thermostatic Tempering Valve meets the above operating conditions as
stated in ASSE 1016 (45 PSI differential (310 kPa)), with hot water supply between 140°-
180° F (60°-82° C), cold water supply less than 70° F (21° C). If your operating
conditions vary from those stated in the standard, performance may vary as well.
† At 45 PSI differential (310 kPa), with hot water supply between 140°-180° F (60°-82° C).
X
X
X
The information contained in this document is subject to change without notice.
Optima MIX-135-A S.S. — Rev. 3 (01/04)
Copyright © 2004 SLOAN VALVE COMPANY Printed in the U.S.A.
This space for Architect/Engineer approval
Job Name Date
Model Specified Quantity
Variations Specified
Customer/Wholesaler
Contractor
Architect
SLOAN VALVE COMPANY • 10500 SEYMOUR AVE. • FRANKLIN PARK, IL. 60131
Phone: 1-800-9-VALVE-9 or 1-847-671-4300 • Fax: [phone] or 1-847-671-4380
www.sloanvalve.com
Thermostatic
Tempering
Valve
Made in the U.S.A.
3
7
/
32” (82 mm)
1
39
/64” (41 mm)
1
3
/
16
”
(30 mm)
2
27
/32”
(72 mm)
3/8” COMPRESSION
CONNECTION INLETS
AND OUTLET