Instructions / Assembly

up from the ground on a post 5 sections down the fence line. (We recommend only 5
sections at a time so your string line doesn't sag), and these will be your tie on points for the
other end of your string line.
NOTES
Do not tighten this down with a wrench yet as there may need to be an adjustment
to the height when the stringer is placed onto the bracket.
TIPS
Make sure that the dome side of your carriage bolt that are inserted at this stage are on all
on the same side of the fence for all posts. This will be the side of the fence that will have
the ripped half board on either end of the fence section. See step 8 picture.
STEP 7 - Install Middle Brackets
Slide two Middle Brackets onto the next post in the fence line, (if it is not a step section),
making sure that the stringer seat is positioned above post bracket collar and in line with
your string line, and tighten these nuts only slightly to hold in place.